Solvent recovery System

Posted by Christian Silmaro on December 26th, 2016

If you want to extract the oil from oil bearing products then process of extraction is done through solvent technique. This process is commonly used in big industries and is known because of the lasting results which it offers to the customers. The method is quite simple but only for the people who have been performing it from a long time. Usually company like Hitek is known for performing such type of services because of new technologies which they use and also the technique that they have for the extraction process. So far the company has served many customers who have given a satisfactory feedback about it.

Know more about the Solvent Extraction:

In this process of solvent extraction, the substances are separated from one or more than other substances with the help of a solvent. It depends entirely on the solubility variations of the compounds which may vary as per the substances. In some of the cases, it has also been found that the substance which needs to be extracted can either be liquid, solid, or even in the gas form. For such substances the extraction process is done with the help of a liquid solvent. It is also called as liquid-liquid extraction process. The technique if contains solid material can also use the extraction process without any kind of hassle.

Method of the Solvent Extraction

The process of solvent should be well understood. At Hitek, you will thoroughly be explained about every part of the extraction and how it works. Still for a better idea about the process, here is a brief detail that you might want to know. A solvent is usually chosen which will not get mixed with other compound present in the substance. This will create two different layers which can then easily be separated. It is necessary that the compound which needs to be extracted should have a better solubility in the solvent where it has been added.

Types of the Solvent Extraction:

There are different types of solvent such as polar and non polar solvents. In polar solvents, the molecule have negative electrical charge while in non-polar, there is a slight electrical polarity in molecule. Hitek undertakes both the process and you can also seek for the plug flow reactor service which will be given to you in a professional manner.

There is no hard and fast rule of using extraction process but in case you have never worked on it then you better should seek for a professional company like Hitek that can give you the best of the services at great value.