Automatic Winding MachinePosted by CarrieXian on January 12th, 2017 Introduction of Automatic Winding Machine: Automatic Winding Machine is a high speed automatic coil winding machine. This automatic winding machine is applied to wind the sewing threads, embroidery threads, nylon threads and so on. You can achieve a good shape formation with this high speed automatic winding machine. This automatic coil winding machine provides a good solution for yarns while keeping assured safety and reliability and broad applicability. If you buy this automatic winding machine, you immediately got a good assistant to deal with the yarn which has high efficiency and also is easy to operate. The automatic coil winding machine is equipped with an electro-magnetic tension control system, a frequency-change slotted spool yarn guide device, and a pump-based cycling-type oiling device. All devices above ensure the automatic winding machine can have a great quality of packages. We can improve the machine if you have your own requirements as it is a customized winding machine. As a winder supplier, we will do our best to meet your any requirements on yarns. Advantages of Automatic Winding Machine: 1. The automatic winding machine is a customized winding machine. Clients could give your own request for this winding machine. 2. Electro-magnetic tension control system, a frequency-change slotted spool yarn guide device, and a pump-based cycling-type oiling device ensure the package of yarns. You can have good packages by using our automatic coil winding machine. Winder Parameter Table on the Top Board: Password: Range of 00000~9999 Full spool length: Range of 0~60000 m Winding linear speed: 200~1000 m/min Oil wheel speed ratio: 30~200 Winding initial tension: 0~100% Winding end tension: 0~100% Yarn-detector state: 0.0~9999 s Empty spool position confirmation: Computer test value Fixed block position confirmation: Computer test value Length correction coefficient: 0.800~1.200 Main Specification: Model: HR0604-A / HR0604-H / HR0604-Y Shape formation: Conic shape/Cylindrical shape/Pagoda shape Tube angle: 2°20′/ 0°/ 0°~2°20′ Max. Winding outside diameter: Φ115 Spindle number: 4 Max. Linear speed: 1000 m/min Pattern round number: 3~4 Like it? Share it!More by this author |