LANDSCAPE DRAINAGE BUYERS BEWARE

Posted by rohny on January 17th, 2017

            LANDSCAPE DRAINAGE BUYERS BEWARE

 Many home owners are overwhelmed with problems of proper drainage. When the heavy rains come their yards become lakes causing manyissues such as, grass and plants dying from too much water, water entering their homes through weep holes or other areas where thereis access, and just not being able to enjoy their property until the waterdissipates and even then it is a mud hole. These situations becometiresome and many of the owners look to contractors for a solution tofix the problem. In a perfect world where everyone is honest and all the people that have companies are experts in their field this would work out fabulous. Unfortunately we do not live in a perfect world and their are landscape contractors that either one do not know proper drainage techniques or two try to do the job cheaper because the customer wants a better price or the drainage contractor is trying to make moremoney.

This article is to inform you so you will know the consequence and try to avoid them First and foremost you must have positive grade on your property meaning that if you are putting adrainage system in your backyard then the backyard must be higher than where you want the water to drain (most of the time the street). How much higher the backyard needs to be depends on the length of the drain system because to have proper slope you must have one inch of drop per ten feet of drainagepipe so if you are installing a hundred foot of drain pipe than you need the street to be ten inches lowerthan where you place the first drain box (Catch Basin). If you do not have the slope needed than this iswhen you must look in to other options such as, bringing in soil and raising the backyard (only when youhave enough foundation showing, you do not want to raise the ground higher than the foundation you need at least one inch showing at all times), draining into a sump pump box and pumping the water out (this option requires electricity and a much larger drain box where the pump will be located), and the finalsolution that i will mention is installing a series of 30 gallon landscape drainage basins and having the drains throughout the yard drain into them.

The last option requires a whole twice the size of each drain basin that you will be installing because to ensure proper landscape drainage you must install pea gravelaround the drain basin so the water can seep out. These solutions are usually only used in worst case scenario situations but I wanted you to know the true options that are available that work. In most cases where there is a landscape drainage problem and let’s say there is only five inches of slope when you need ten inches a good drain expert can install a drain that will work by creating slope from the back yardto the front then leveling out to the street because water that is level still flows but not as fast. They willalso be able to incorporate your downspouts from your gutter into the system so that the head pressure(the water pouring down the downspout from the roof) will help push the yard drainage water out. Theseare options that a good drainage contractor will be able to see, and then he will be able to let you know which drainage option will work best for you.

Now let’s say you have enough slope to do a regular drainage system in your yard. The question than is what does a regular drainage system consist of? A regular drainage system consists of catch basins, fittings and pipe. Let us look at drainage catch basins first there are many type of catch basins that drainage contractors use and all but a few are in accordance with good landscape design http://www.seedsofseasons.com/  practices.

One approved type is concrete basin which these are used in residential and commercial applications the residential will usually start out as 10 inches by 10 inches and normally have metal grates. They are well constructed but can be an eyesore in a beautiful landscape. Next you have the plastic drainage basins these are made by a number of different companies and most of them are built to last a lifetime. These

Drainage basins come in many different shapes and sizes but we would not suggest you go any smallerthan 9 inches by 9 inches for the yard drainage basins and 6 inch round for the garden drainage basins. This type of landscape drainage basins are normally the ones used by the drain experts because theyare more versatile and easier to work with. These drainage basins come with different grates (Tops) for different applications flat green grates for the grass and black flat grates for others in stone or flower beds.

The grates also come in atrium grates which are grates that are built higher like a dome shape toallow water to flow if the bottom of the grates gets clogged. If you clean around the grates after each stormthere will be no need to install atrium drainage grates as they are unsightly in the landscapes because ofdomed shape but you might want to consider them if using them directly in the flower beds to keep mulch from clogging drains. Some drainage experts but very few prefer to build their own catch basins out ofbrick and mortar this too is an acceptable practice and sometimes can be used to get slope on the pipe in cases where every inch counts because the slope of the land is very minute because this will allow thepipe to be raised to where they need it and a few inches at this point can mean the difference betweena successful drain or unsuccessful drain. Always make sure that the drainage contractor is using actual drain catch basins and not sticking a four inch grate on the end of a fitting.

This brings us to proper fittings to be used in backyard drains. The more fittings used in a drainage system or as many know as French drains (which we will discuss in this article and more in-depth in a future article soon to follow) will slow down the water so an ideal system is using the least amount of fittings as possible. The fittings used in a drainage system include a 90° long and short, 45°,22½°, Y’s, and T’s all these fittings come in different material for the different types of pipe which we will discuss next. Even though they sale short and long 90°’s the long 90° is the only one that should be usedand is the only one a drain expert will use. I myself prefer to use two 45° separated so to slow the water flow as least as I possibly can. The suppliers also sell T’s but they are not an approved fitting in a lawndrainage system unless they are being used as a clean out access which is only needed if you have anextremely long run without a drainage basin for access. The Y’s are the only proper fitting to be used by the drain expert to connect another pipe into the main drainage system. All of the other fittings can be used but always try to find the straightest route possible.

The Final material in a system which is also one of the most important is the type of drain pipe. Thereare several types of drain pipe that are used in drainage systems such as Schedule 40 (The thickest),SDR35 (The next step down), and Sewer pipe (Thin Wall), and corrugated pipe. The only two that areconsidered correct installation practice by the drain experts are schedule 40 and SDR35 all others arethe cheap way out and come with expensive consequences later on. The SDR35 pipe is the norm andfollowed by all of the drain experts because schedule 40 is considered overkill. If you choose to do a drainage system and not use the approved pipe a few years from now you may have to redo the whole system. The first of the unapproved options sewer pipe is thin and very easy to crack under pressure from roots or future digging. Once the pipe breaks dirt and roots can get into the pipe and cause the system to get clogged and no longer function as it should. Corrugated pipe which is a black flexible pipe can and will hold dirt in the ridges and after the years will get clogged with dirt slowing down or stopping the whole drainage system or another problem that can occur is a root can grow underneath it and since it is flexible will cause the pipe to raise and stop the flow of the drainage system. All of the above scenarios will cause the system to be dug up and redone which can become very costly.

Installing a drainage system is a big project and one must research the correct procedures to pick a drainexpert that will do it right the first time and stand behind his work. I pray that this article has helped youin your quest for knowledge so that you can be informed. Please feel free to post in my blog any questions or comments you might have.