Do's and Don?ts of Cleaning with Gerni Pressure Cleaners

Posted by mygenerator on February 6th, 2017

Pressure washers can be a huge advantage when you have to clean large areas or outside objects. They are particularly useful for cleaning patios, outdoor furniture, machinery, or even your car. There are different types of pressure washers in the market that you can purchase according to your needs and budget. They can save you a lot of time and effort since they are efficient for all types of outdoor cleaning requirements. You can also choose between electric or fuel-based pressure cleaners.

Pressure washers can also be used to remove old paint from a surface where sand blasters are not desirable or unavailable. Make sure to operate the pressure cleaner outdoors since they are not well-suited for indoor cleaning, particularly petrol models. Fuel-based pressure washers are quite portable, and you can take them to locations without mains power outlets. This makes them useful for cleaning agricultural machinery and on work sites. However, a pressure washer dispenses water at a high-pressure and it is best to be careful while using them so that you do the job efficiently without any injuries or damage to the property.

Gerni is one of the brands that come to the fore when anyone talks about pressure cleaners. They have a large and powerful range of pressure cleaners suitable for domestic as well as commercial use. A few do’s and don’ts of cleaning with Gerni pressure Cleaners are discussed here.

• The water stream dispensed by the pressure washer has enough pressure to cut through the skin. Make sure to point it at the object that needs to be cleaned. Be alert while handling the nozzle when the pressure cleaner is on. Also, you have to be careful that there are no children in the vicinity to avoid any potential mishaps.

• Point the pressure washer nozzle at an angle to make sure that the water is able to wash off the dirt and grime from the surface. Pointing its head straight towards the surface may not be as effective. It might take a bit of practice to get used to your pressure cleaner. However, working in sweeping motion almost always gives the best results.

• Use different nozzle tips to suit the type of job–this will ensure that you get the most out of your Gerni pressure cleaner. There are wide spray pattern nozzles, narrow stream nozzles, etc. to choose from. The narrower the stream, the higher the force it exerts. This helps to clean even the most stubborn stains off an object. Also, it is better to you use wide spray nozzles when cleaning delicate surfaces such as glass or vehicles.

• When operating pressure cleaners, wearing safety equipment such as safety goggles and gloves is a good idea. Grip the wand tightly to make sure that you are pointing the nozzle in the right direction. Keep moving the nozzle to prevent the water stream from cutting through the surface itself instead of cleaning it.

Read the instruction manual that comes with Gerni Pressure Cleaners to make sure that you are able to make the best of the equipment. Use it only as intended and also ensure that you store it safely while it is not in use.

About the Author:

Steve Reynolds, Power Product Expert at My Generator is a small engine specialist with particular expertise in Generators, Water Pumps, Pressure Washers and other Outdoor Power Equipment products. Outside of work; an avid caravan enthusiast who enjoys time on the road and has gained years of familiarity with Caravan & Camping products also. A passion for power products used for work, home and leisure!