Greentelftth cable termination box and steel strap

Posted by WilliamNance on February 8th, 2017

Make a cutout in the middle of the Fiber Distribution Point Manufacturer by using a jigsaw with the measurement of 5 feet in horizontally and 1 foot in vertically.

Then, slash two pieces of plywood with the measurement of 4 feet high by 5 feet wide. Then, slash two pieces into 4 inches high by 1 foot wide. Then, fasten those four pieces together using nails or screw. Drill some 1 inch hole on the 1 foot wide wood. It will be the way for the fiber to go through. Then, connect the box precisely under the opening. Use your nails or screw to fasten it. It will display your fiber optic lights later.

The next thing you have to do is to polish the table and paint it. In order to make the light illuminated by the lighting pop up in the dark, go for the dark color. As the options, you can consider black or dark brown. Some other alternatives are dark green, dark purple or dark blue.

After the paint is dry, insert one fiber optic ribbon into each 1-inch holes you have made before. You can use some different colors to make it look interesting. Attach them securely on the wood. Then, connect each ribbon end to the illuminator.

Keep the illuminator under the table securely by using cable termination box and steel strap. Hook the illuminator up to the power source which is close to the table. Instead of electricity power, you can go for the illuminator with battery-powered.