How to use a Manual Tile Cutter

Posted by Randy S.Pence on February 13th, 2017

One of the biggest issues for humans with regards to tiling their kitchen and rest room floor or wall is cutting the tiles. Once you've got mastered how to use a guide tile cutter then it'll make DIY tiling initiatives loads simpler. There is truly no need to call within the specialists for reducing porcelain or ceramic tiles.

This is a simple venture which can be easily executed with accuracy and precision if the appropriate tactics are used. You can also want an electrical tile cutter to cut via natural stone tiles however for manmade porcelain and ceramic tiles a manual tile cutter will suffice. Below we speak you through the way to reduce porcelain and ceramic tiles with a guide tile cutter.

Safety:

As with any DIY challenge, safety is vital that's why we advise you put on protection goggles. Also make sure you're concentrating fully and aren't being distracted whilst slicing your tiles due to the fact the blades are very sharp.

Preparation:

If you have got by no means used a guide tile cutter earlier than then it's far high-quality to have a few trial runs first simply to get used to the gadget. You must have a few spare tiles to exercise on first.

Also, make sure the specified workspace is massive enough that allows you to paintings and could enable you to make the cuts which might be needed. Remember to absorb to account the scale of the tiles. Now you are geared up to begin slicing your porcelain tiles to length.

Cutting porcelain and ceramic tiles:

For simpler cutting, mark the tile with a pencil that allows you to permit you to line it up effectively. Then pull the tile cutter cope with to one side before placing the porcelain tiles in opposition to the tilestop to save you the tile from moving whilst making your cuts.

Create a small indentation at the tile by using scoring it with the blade via pushing the cope with over the tile once. Then entire the cut through pressing down at the tile cutter manage to snap the tile.

Once you have got made the required cuts on your tiles, easy the tile cutter with WD40 to save you the build up of dust. You can also check the best angle grinder brand.