Enjoying with excellent bolt vape juice by bolt vapes
Posted by John on March 26th, 2017
A new mod at MadVapes. This has a similar appear and feel as a Rough Stack except that it has a side fitted horn switch. It is made of aircraft grade aluminum and finished to give it a great finished look. It is designed to hold an 18500 3. 7 volt button top battery power. The Bolt is just shy of a 1" diameter and has a length of about 3 3/4".
A new mod at MadVapes. This has a similar appear and feel as a RoughStack except that it has a side fitted chrome horn switch. It is made of aircraft grade aluminum and polished to give it a great finished look. It is designed to hold an 18500 3. 7 volt key top battery. This will perform excellent with 1.5 ohm dual coil cartomizer or even a 2.0 ohm or perhaps 2.5 ohm single coil cartomizer. The bolt will work great with the Dual Coil 510 Tank Cartomizer because of the side mounted horn switch and the slightly raised 510 connector on top. The bolt ejuice is just shy of a 1" diameter and has a length of about 3 3/4".
I am aware (as do most) that the majority of vapers can't find the money for a 180$ RDA, so for many of us, clones are the only option when it comes to High-end RDAs.
For those that can afford to purchase an authentic, supporting the planning company is very important.
When you purchase an authentic, an individual help pay for staff, generation, R&D and most importantly, further innovation. A cloning company doesn't work towards evolving the market, or products it builds, and if we all purchase clones, then a company’s we've grown to love won't be able to deliver us new and amazing bolt vapes products.
Let's dive to the spec's:
RTA Rebuildable Tank Atomizer holding approximatly 2 . 5ml of liquid ø22mm
Stainless steel 316L
Individual or dual coil Reduced chamber Airflow Control: ø1. 2mm, ø1. 5mm and also ø2. 2mm (2. 2mm can be used to adjust hole on hole, allowing an accurate airhole size as you love to vape)
Cotton or fiber wick Maximum 2 .5mm coil diameter (please tend not to try to go greater than 2 . 5mm since there is not enough space to the chamber )
Ensure when you build LE MAGISTER to keep room between coil and also plate, and between coil and also central post, approximately 1mm around.
Spare kit: 2x Oring ID18mm Tore1mm green Viton and 1 Oring ID5. 5mm Tore 1.5mm
The particular wicking style that Vaponaute has perfected for this RDA is simple, and interesting. It offers plenty of juice for the spaced coils, keeping the build deck thoroughly wicked, despite the juice residing under.
Differences involving the clone and authentic:
The clone, while the same in almost all factors, has substantially smaller caps around the negative screws. The center post is also shorter, allowing less space involving the 2 bolts holding in the positive wire. This makes this clone infuriating, and also practically impossible to build a dual coil on. Attempting to hold both strands of wire beneath the bolt while tightening the center post took a full hour or so to accomplish, and anything greater than a 26g wire was virtually impossible to fasten lower.
I've heard the original obviously doesn't experience these issues, so if you want the full experience of "Le Magister" it's a no brainer to purchase the authentic.
So how will bolt vape juice vape?
"Le Magister" is a rather impressive RDA. It provides crystal clear flavor, and plenty of juice space to help keep that flavor going. I personally enjoy a warm-hot vape, so I think I'll need to do some coil tinkering to discover a sweet spot for that size of the deck before I can have this RDA declare the top spot currently held simply by my Aeolus V2. That being said, for someone looking for an RDA with perfect flavour, a unique design, and the ability to hold a huge amount of juice, I really can't recommend anything better at the moment.
For getting more information about soda flavored ejuice visit the website http://www.boltvapes.com/