All About Basic Tech Repairs: Hover Board And Play Station 4

Posted by Alick Willson on March 27th, 2017

If you have got a hover board or play station, as an electronic gadget, it can get damaged or broken at one point of time. Some may be major ones while others can be minor ones. If the damage is a minor one, then a lot of money is wasted if you run to the shop now and then to repair the minor issues with your favorite gadgets. This article will take a look at how to fix some minor issues of both the gadgets, i.e. hover board and play station, so that you don’t need to visit the repair shop and you will also don’t need to spend a lot of money behind the small repairs that you can fix yourself easily.

First, we will start with the minor hover boards repair.

How to repair the hover board?

• Hover boards repair is quite easy. If your hover board is not functioning properly, then you will need to reset or recalibrate it. It is easy to reset or recalibrate it. To do so, you will first need to turn off the hover board first. Then you will need to keep it in a sitting level and the wheels should be on the ground as well. Press and hold the power button only for 10 seconds. Then let it go and turn on the hover board. It is ready for use!
• To understand if the battery is not working, then you will need to connect the hover board to the charger for full 10 minutes and after that check if it is working, if it is not, then the battery is not working and it needs to be changed. To change the battery, you will need to open up the screws of the bottom of the hover board. Take a picture of the cables and disconnect the battery connector. Standard ones have got 1 connector. Take out the old battery and replace it with the new one and connect it properly with the connector. Then place the wires the same way in the picture and place the cover that you took out and then check whether the battery is working or not.

How to repair your playstation4 controller?

• If your PS4 controller is not working, then you will need to reset it, to make it work again.Play station repairs is quite easy to do so. To do so, first turn off the console. Then you will need to locate the reset button at the back side of the controller. Then you will need to press the reset button with the help of a paperclip. Then you will need to connect it to the PS4 and then proceed with the pairing with the PS4.
• If you are facing some problems with the issue of lagging or freezing when using your PS4, Check the hard drive, you can also free some spaces in your PS4 as well. Both of these will repair your PS4 within no time. To check the hard-disk, turn off the PS4 and then disconnect the power cable. And then check whether the hard-disk is seated properly or not. Then screw back the cover again properly.

Hannah Smith is a tech geek who loves to repair various gadgets and wants to know more about tech stuffs. She also is interested in play stations and hover boards and learns to know more about her favorite gadgets and how to repair them, such as: Hoverboards repair and PlayStation repairs without spending much cash behind them!