Choose the Right Brake Pads For Your Car

Posted by Ames Michael on March 31st, 2017

A lot of people take their car brakes and brake pads for granted. The braking system of a car is much more important that other components as the brakes are responsible for preventing forward momentum in emergencies and will stop the vehicle when they need to be stopped.

Brakes work together and based on the actions of the driver, they either stop or slow down the driver. An important part of the brakes are the brake pads. If you don’t have the right brake pads, the stopping distance of your car gets restricted.

The brake pads work by creating a friction between the car’s discs and brake. These look like metal discs about the size of dinner plates. They sit within the wheel housing. When the driver applies the brake, the brake pad is forced against the brake disc and friction is created due to the contact between the two surfaces to apply slow momentum on wheels. The car will slow down or stop based on the amount of friction.

The type of brake pads you need depends on the type of car you have. Brake pads are used constantly and subjected to a lot of strain and stress. The faster you drive the car, the greater will be the strain on the pad. Whether you wish to buy Subaru Brake Pads or any other brake pads, there are various options available.

Different Types of Brake Pads:

Metallic : These are the most common type of brake pads and are used in various types of vehicles. These pads are created with a unique blend of various metals. The blend includes iron, graphite, steel and copper. Once the right mix has been formulated, a special bond is used for fusing these metals together for creating the metallic brake pads. These are the most cost effective type of brake pads and thus used in most vehicles. Metallic brakes are a good conductor of heat, thus, they can stop almost any kind of vehicle. The drawback of these brake pads is that they are so hard that they might break down other brake components. They are heavier than other kind of pads. Thus, they are not an ideal choice for performance and racing cars. Toyota Brake Pads and other brand car brake pads are usually metallic.

Organic Pads: In earlier times brake pads were made from a substance known as asbestos. This material is preferred because it absorbs a high amount of heat without breaking down. However, this material was phased out eventually because the dust that came from caused a lot of health risks. Organic brake pads are made from naturally available substances such as glass or rubber. Thus, there are no health risks of using these brake pads. Another material used for making organic brake pads is Kevlar that is just like asbestos and absorbs a lot heat. However, it doesn’t create dangerous by-products like asbestos did.

Ceramic: These are the most expensive brake pads. However, the high cost is because they are very durable, lightweight and perform well. Ceramic pads are usually found on racing cars and performance cars due to the various advantages that suit these performance models.

Irrespective of whether you wish to buy Volkswagen Brake Pads , Audi Brake Pads, Volvo Brake Pads or any other car brand brake pads, you can easily find them online. To get the best quality and genuine brake pads, ensure that you order them from a reputed website only.