Easy, Safe And Eco-friendly cnsuperpower Black Diamond Log Splitter

Posted by chinalogsplitter on April 7th, 2017

With snow forecast across the UK later today, be prepared for the cold snap and who knows, maybe even a white Christmas, by keeping the home fires burning. The Black Diamond Log Splitter makes log splitting fun, easy, eco-friendly and equally importantly; very safe. The clever ergonomic design uses gravity to do all the hard work, applying up to 14 tons of splitting force whilst simultaneously avoiding all the backache that is often an unfortunate consequence of chopping wood by axe.

Smart-Splitter

The amazing patented design of the Smart-Splitter has to be seen to be believed. This is not a gimmick tool, this the real deal when it comes to splitting logs large and small. The Smart-Splitter is lightweight and so quick and easy to use no wonder it’s one of the leading brands in Europe.

The Smart-Splitter can be used in the garden, in a shed or even inside the house and integral ‘splinting wedge’ is perfect for making kindling. Unlike electric or petrol powered splitters, it has the added benefit of no environmental impact when in use.

The Smart-Splitter is so easy to set up and use:-

Get a base log, using the 20mm drill bit supplied, drill a hole of at least 12cm deep and 8cm from the edge of your base log

Place the guide rod securely into the hole, then place over the guide rod the 1 metal washer, the rubber washer and then the other metal washer. Tighten the bolt so that the guide rod is tight

Lift the handle of the Smart-Splitter’s cutting wedge and place your log into position under the cutting wedge

Lift the striking weight with both hands and drop it slightly onto the splitting wedge so that the wedge is slightly embedded into the log

Lift the striking weight to the top of the striking rod. With both hands, throw the striking weight down towards the log, making sure you let go of the striking weight before it hits the log. Repeat this until the log has split

If you wish to cut kindling then place your wood / split Log Splitter under the splinting edge and again with both hands firmly on the striking weight thrown down the weight, ensuring you have let go of the weight before it hits the wedge