Professional installation of swimming pool with safety surface and Poured in Pla

Posted by John on April 9th, 2017

Poured in Place Rubber has been used in playgrounds around the world as being a safety surface for a couple decades now. Recently applications have got expanded to pool areas, pathways, and any surface to minimize falls due to falling.

On playgrounds, the system is a welcome substitution regarding mulch. It is compliant with the entire American with Disabilities Behave (ADA), is virtually maintenance free of charge, and colors can be put together to create a very attractive area.

Poured in Place Rubber is preferably installed on a hard safety surface like asphalt or concrete, but can also be installed on a base of crushed stone. It consists of two tiers:

1) The lower layer usually referred to as SBR or Buffing comprises of shredded rubber and also acts as the cushion. The particular thickness of this layer will depend on the fall height in the community. It also will depend on the manufacturer of the substance. For example, in an area where there is enjoy equipment that is 4 feet high, the manufacturer might recommend that the buffing is 1.5 inches thick.

2) The top layer is called the wear layer and is usually comprised of what is called EPDM (ethylene propylene diene Monomer), which is a type of synthetic rubber.

First, the buffing is mixed with the binder, usually in a mortar mixer, and packed down to the required height. The installer must be careful not to package too hard; otherwise, it could lose its resiliency. The particular layer usually cures over a period of 24 hours. The second layer is then mixed with the same binder and troweled above the first level. It usually takes a lot longer to install the next layer since great care must be taken in flattening the particular EPDM and making sure the top is level. The next layer takes about 48 hours to cure.

If it rains, the poured in place rubber cannot be installed since the binders do not react well in water. The system is OK if it rains after it is installed, but not during installation.

When properly installed, a poured in place rubber will last for more than a decade. When any holes appear on the system they should be patched immediately simply because they will only get bigger.

Variety of styles are available there is surely something for everybody. Always remember to shop around, and get the very best estimate you can for installing an in-ground pool. In case you are more adventurous and like to do things yourself, consider an above-ground swimming pool. Before long, your family will be having a fantastic time with a nice cool drop in your own backyard rubaroc pool upon hot summer days.

For more information about duarock please visit the website here at http://www.rubber-deck.com/

Like it? Share it!


John

About the Author

John
Joined: December 27th, 2014
Articles Posted: 5,411

More by this author