How to Resolve Paper Jam Problems in Desktop Inkjet Printer

Posted by Wbic.info on May 1st, 2017

For most of the printer users, paper jam is a common technical error that hampers their tasks and projects. It does not matter, if you purchase an advance or costly printer, opportunities are very high that your device can get trapped due to jamming of a paper. Read few important instructions how to clear a paper jam error in an inkjet printer? You can take professional help or get quick technical support from certified technicians.

Switch off Printer:-

Before you begin clearing paper jam, you should switch off your printing machine to decrease the opportunity of damaging the device. This is very advisable to unplug the device from power supply to be extra safe. If you are unable to identify this step, you should call at HP Printer Support Number 1-800-834-1377 for instant technical support.

Open up main cover-

Take out all papers from output trays and printing feed. Now open the main cover of your device.

Move printer head sideward to free paper-

Printer head is the foremost part of inkjet printer that releases ink on paper from attached cartridges. If paper is trapped against printer head, it cannot move any side. If any required technical support services, you should hire HP Printer Tech Support services immediately.

Gradually Eliminate Papers-

Hold paper steadfastly and try to pull it out over gradually. You should be aware and careful that paper must not tear and ignore pulling forcefully as it may harm you. To reach tapered areas use tweezers and gradually pull the paper by wrenching from the left and right ends.

Eliminate the print head-

In the case, paper is yet now jammed inside the printing machine, you must follow the instructions specified in the instructional manual of your device. If paper is torn, take out paper scraps gradually. If any paper is unbroken, holds crumbled paper with both hands and pull it downward. If you experience any issue, you should take HP Printer Customer Support immediately.

Check Out Output Tray-

Papers can get struck in machines near output tray in the printers. The paper may trap in the slot feeding output tray, therefore remove any small piece of paper visible there.

Clean printer heads:-

After removed papers, you have to run a print head cleaning procedure to get rid of any microfibers clogging the nozzles and causing printing problems. If you are not able to know about this step, you should hire HP Printer Technical Support services quickly.

Content Source:- http://bit.ly/2qo6zif