All You Need To Know About Haws Portable Eyewash Station

Posted by john miller on May 18th, 2017

In every organization, where workers need to work with chemicals directly or indirectly need to have an eyewash installed at the nearest possible station for the workers. To be precise, the distance shouldn’t be more than 10 seconds away. It is the duty of every safety manager in the facility to ensure availability of primary eyewash for safety of the workers.

In the event of any chemical contact, it is crucial to immediately wash the eyes to remove harmful substances and prevent any permanent damage. Such incidents happen when vacuums like minuteman hepa lead vacuum are not installed in the facility.

But in remote and confined places, mounting an eyewash station is challenging and sometimes, not feasible at all. This is the reason non-compliance is high in such workplaces and causes eye injuries to several workers on a regular basis. Due to injuries, workers are forced to stay away from work for days.

There are also certain places or vehicles, which are exempted by ANSI to keep primary eyewash machines. In these places, it is difficult to fit a primary eyewash station, hence bottles of eyewash are placed here. But bottles are not a viable option as it provides only up to 3 minutes of wash against the required time of at least 15 minutes.

To ensure compliance and safety of workers working in such facilities, secondary equipment like Haws portable eyewash station is the best solution. This portable equipment can be installed in remote locations and is easy to move from one place to another.

Here are a few things which should be kept in mind to buy the right machine for eyewash.

●Make sure the machine has two jet streams to wash both eyes at the same time. Machine with one jet stream is inefficient and might cause damage to the second eye.

●Make sure that the equipment is equipped to provide supply of at least 15 minutes of clean water.

●Check out the environment where the machine is installed. If the temperature is below zero degree, it is important to install freeze resistant eyewash.

●Check out the length of power chord and the size of the power plug.

●Make sure that the tank is made out of high density polyethylene and is FDA approved to store clean water. Also ensure that the tank has wide opening for easy filling, cleaning and inspection.

Consider these points to buy the right secondary eyewash machine without any hassles.

Author’s Bio: Author is an avid reader and blogger. This article is about portable eyewash station. For more information, visit:- www.westernsafetystore.com