Kitchen Cabinets Installation Process Made Easy

Posted by universalposition on June 23rd, 2017

Installing kitchen cabinets can enhance functionality and reduce clutter in your kitchen. Even if you are hiring an expert to install the cabinets, it is still advisable to know more about the installation process. Knowing the process of cabinet installation can help you with checking whether or not the professionals are doing their job adequately, and you can also give your input throughout the process.

So, you should not remain ignorant about the process. Read on to know more about the process of installing kitchen cabinets.

The process starts with examining your custom kitchen cabinets Totowa. Ensure that the cabinets are the exact design, color and size you have ordered.

Now you need to confirm the place where you want to install the cabinets. Make sure to mark the positions on the wall where the cabinets are to be installed. You can use a measuring table, a level and a pencil to effectively mark the position.

The next step is to install the wall cabinets. Mark the ideal position through the measurement from the floor. Consider the space for the splash, countertop and base cabinets. Add up those measurements and, using a level line, choose where you want the bottom of the cabinet to be. Now mark where you want the top of the cabinets to be.

Discover the wall studs. When you have perfectly located the studs using a finder, mark their positions above and a minimum of five inches below where you want the cabinet bottom to be. The center of the studs will be defined by the straight vertical lines between both sets of marks.

In the next step you require attaching a temporary support rail. Align the top edge of the rail with the bottom edge of the cabinet and screw in a support in the wall. A custom cabinet maker Totowa will expertly carry out the entire installing process.

It is time to make a sub assembly. This can be done via attaching each single cabinet together through their placement of backside up on a flat surface. Make sure there is no height discrepancy as this can lead to the creation of a ridge between the cabinets.

Finally, you have to secure the overhead custom cabinets Totowa. When the cabinets are flush, you need to clamp the even surfaces together, using screws for permanently attaching them. Attach the cabinets to the wall by using screws.

Consider the above mentioned steps to easily install your kitchen cabinets. Now you know how to easily install the cabinets in your kitchen!

Fore more visit: www.krmastercarpentry.com

Link To Directory
Top Searches - Trending Searches - New Articles - Top Articles - Trending Articles - Featured Articles - Top Members

Copyright 2020 Uberant.com
709,326 total articles and counting.