Touch Displays WAY-AX and WAY-DX
Posted by Andreas Winkler on June 27th, 2017
The innovative touch display series WAY-AX and WAY-DX for the process control in the manufacturing of high quality products.
Better usability by a wide range of models.
Process Indicator WAY-AX
- for two analog values or potentiometer input
- applicable as flow meter, level meter, pressure meter etc.
Digital Indicator WAY-DX
- for incremental encoder or sensor signals
- applicable as counter, position meter, tachometer, frequency meter, speed meter etc.
- additional functions e.g. timer, calculation of process time, reciprocal calculation
Better Visibility by a strong contrast & high resolution
Dot Matrix Display with 186 x 64 pixel
- clear text explanations and commands are providing an intuitive menu structure
- a wide range of units as well as any kind of symbols can be displayed
Three color LCD-Backlight (green, yellow, red)
- color can be adjusted easily by just one parameter
- event depending color change, e. g. below limit, close limit, over limit
Better flexibility by touch & optional modules
Resistive Touch Panel with IP65 protection and enhanced temperature range (-20?C ... 60?C)
- Suitable for rough environmental conditions
- Can be operated with any kind of working gloves, no limits on the used material
- Maximum flexibility by modular design
WAY-AX
- 2 analog inputs (16 bit), 3 control inputs
- -10 V ... +10 V / 0 ... 20 mA / 4 ... 20 mA
- accurate 10 V reference output for potentiometers
- mode for single, dual or cross calculated inputs
- totalization, tare, average filter, etc. for each input
- totalization of sum / difference of both inputs
- linearization with 24 set points for each input
WAY-DX
- 2 incremental inputs (HTL), 3 control inputs
- for PNP, NPN or NAMUR sensors
- up to 250 kHz
- for speed, process time, timer, counter or velocity application
- linearization with 24 set points
- scaling, average filter, start up suppression
For more information please visit the product site at www.waycon.biz/products/display-controls/
WayConPositionsmesstechnik GmbH has been developing and manufacturing precision sensors for position and distance measurement since 1999. As an innovative company with headquarters in Taufkirchen near Munich and a branch in Br?hl near Cologne, we sell our products all over the world. Our goal is to provide our customers with the best possible measurement technique solution: from high-quality sensors from the standard range to customer-specific solutions, from prototype to series production - for the most varied applications in industry and research. The products made in Taufkirchen are subject to rigorous quality standards and every single one is delivered to our customers with a calibration certificate.
Firmenkontakt
Waycon Positionsmesstechnik GmbH
Marcus Venghaus
Mehlbeerenstr 4
82024 Taufkirchen
089-67-9713-0
info@waycon.de
http://www.waycon.biz
Pressekontakt
Waycon Positionsmesstechnik GmbH
Marcus Venghaus
Mehlbeerenstr. 4
82024 Taufkirchen
+49 89 679713-0
presse@waycon.de
http://www.waycon.biz
