Cone Crusher Safety User Guide

Posted by yoyocrusher on August 3rd, 2017

 The main components of the sand making machine  are the base assembly, the eccentric sleeve assembly, the drive shaft assembly, the motor assembly, the moving cone assembly, the fixed cone assembly and so on. Auxiliary part by the electrical system, lubrication system, hydraulic system. Spring crushers can be widely used in the mining industry, metallurgical industry, construction industry, road construction industry, chemical industry and silicate industry, suitable for crushing hard and medium hard minerals and rocks such as iron ore, limestone, Quartz, granite, sandstone and so on.

Sand Making Machine maintenance knowledge:

1, the spring cone crusher work must be allocated in the middle of the disk, in order to prevent the crusher overload, so that liner uneven wear; do not allow the ore directly into the crushing chamber. The correct ore conditions are: ore distribution The discs are evenly dispersed in the crushing chamber, and the entrapped ore can not be higher than the level of the mortar wall.
2, the maximum cone size of the spring cone crusher 85% to the mine mouth size, otherwise it will lead to the reduction of crusher production, some parts of the cone crusher damage.
3, spring cone crusher do not load start, so as to avoid accidents.
4, spring cone crusher parking, you must first stop to the mine, and let the crushing chamber has been broken into the ore, the crusher to stop.
5, spring cone crusher work to always check the pressure of the locking system and the work of the hydraulic station, found the problem after the timely processing.