Raw Milk Reception Dock (RMRD) Automation SystemPosted by Johannapope on August 15th, 2017 The Raw Milk Reception Dock (RMRD) is the first check point through which liquid milk enters into the dairies. Usually, it’s applied for receiving the milk that’s procured in cans. No, but don’t mistake it as milk collection system. The process of the collection starts from various groups that are located throughout the routes. It is different from the bulk milk collection procedure, which is also operational in these dairies. The milk collection process starts from the village milk collection centers, groups of which are assigned to distinct milk truck routes. The milk cans are unloaded at this RMRD, and then later, the weighing of the milk is done. Later on, the testing is performed, and a milk receipt statement is issued. There’s a daily shift, and various parameters are measured during that time. Here’s how the process goes on;
The cans of individual village milk collection centers from similar routes are unloaded at the RMRD; afterward, their milk is weighed and tested separately to issue a milk receipt statement according to the measured parameters during the day shift. This all depends on the availability of milk and the proposed system. So, according to the requirements, it is managed. Raw Milk Reception Dock (RMRD) Network Automation
Raw Milk Reception Dock (RMRD) Operations Automation
Raw Milk Reception Dock (RMRD) Features
Automation Process Outputs:
• Operator performance and other MIS reports Like it? Share it!More by this author |