GE series horizontal end suction centrifugal pumps are over hung pumps and designed according to EN733/DIN24255 standard, mainly be applied to clean water or liquid with fewer solids, with the cooling device, also can be used for hot water, ethyl alcohol and other industrial process water and sea water. There are three different impeller type can be chosen according to different request: closed, semi-open and open impellers.
Design Feature:
Design strictly according to DIN24255 and ISO2858 design, every part can be interchangeability with other same standard brands.
Back pull-out design and contact the pump and motor through coupling for easy installing and dismantling.
Five size type of shaft of bearing house for the whole series to ensure the less stock and less time of lead time
WAX casting for casing and impeller to make sure high efficiency and wonderful surface
Flange standard can be made to DIN, ANSI, ISO and another special standard
Operation Data of Horizontal End Suction Centrifugal Pumps:
50Hz
60Hz
Discharge Diameter
32 to300mm
1.5 to12 in
Capacity
Max1,100m³/h
Max 4840 USgpm
Head
<=150m
<=492ft
Speed
1450rpm~2900rpm
1750rpm~3600rpm
Working Pressures
10BAR, 16BAR,20BAR
145psi, 232psi, 290psi
Temperatures
<=105° C
<=221 ° F
Application:
Civilian, Chemical industry, Metallurgy, Light industry, Irrigation
Such as: Buildings, water works, irrigation, Circulation for the air-conditioning system; oil refining, Steel industry, silver, copper, iron, sternum, aluminum, zinc ore, etc, non-ferrous metal smelting. Foodstuff, medicine, drink, clean water, liquor, desalination of sea water and water treatment.
