Fabric Workplace Partitions: Essential Tips to Clean Them

Posted by Ainsley Aiken on December 1st, 2017

Usually, people don’t prefer taking trouble with cleaning their workplace partitions frequently. Here, they might suppose that the person they have appointed for cleaning will perform it. But sooner or later, one of your staff members may start complaining of dust at the place of work or you might have a visit of a vital client; these are the times when you have to take a look at the office partitions, wishing you could clean them systematically. In today’s article post, we’ve brought you some key tips on cleaning by The Italian Sign, leader Company in the partition walls fabrication in New York:

Tip#1: Firstly, you can start by doing away with the dust & dirt from the partition with an arid cotton cloth. Here, for you, it is important to ensure that you vacuum the dirt out of the carpet once you are done with removing the dust with cloth. In addition, you can also run a vacuum with the brush part firmly in place, over the partition walls themselves to get any dust you may have failed to spot.    

Tip#2: After that you can take a bucket filled with warm water and handful of washing powder. Make foam by blending the solution frequently and dip a clean sponge into it. And after wringing out the extra water you can scrub these partition walls. Remember that you need to do it tenderly. And in order to prevent any damage you should do it in a circular motion.  

Tip#3: In case, you see any stains on these partitions, then the idea to take them out is to make a solution of 2 tablespoons of bleach and about 4 cups of water. It is good to test the solution on a small area of the partition that is unnoticeable. And if you see that discoloration takes place, stop using this solution in the office. If not, then just wet a dirt-free sponge in the solution and softly blot at the mark until it disappears. Moreover, experts suggest avoid rubbing the stains as doing this can cause them to spread.    

Tip#4: If you want to wash your workplace partition walls, you can dip a clean cloth in the bucket ¾ filled with water and wipe down the partitions to take away the soap and mark remover after wringing out the extra water. In addition, when the cloth gets dirty, you should dip it again into the bucket, wash, and do again. After that just pat the partitions dry using towel.

In line with manufacturers and dealers of custom office furniture in NY, it is essential that you remove as much of the water from the walls. This is for the reason that some partition walls are made using cardboard in the centre and this can’t get too wet.

Of course dealing with Fabric Workplace Partitions is no longer recommended due to these maintenance and particular cleaning. In fact all our partition walls are exclusively made in glass, wood, aluminum, steel and metal in order to ease the cleaning and keep your working place in order.