Why banquet hall lighting matters a lot

Posted by LIGHTING ERA on December 4th, 2017

Wedding is one of the most celebratory occasions in one’s life and this is why it is quite obvious to understand why people spend so much money and time in making the best arrangements for their wedding. Among various things, choosing the right banquet hall is the most important activity that must be done in a stupendous way. Many times, people get the space but they don’t adequate lighting arrangements. In this situation, it is advised to go for professional banquet hall lighting that can make the desired appeal.

As a function is meant to take place in the hall and there is no doubt that the lighting should be ample so as to ensure easy occurrence of various things. And photography is another major element where lighting plays a crucial role. Considering all these points, it is always necessary to pay close heed to banquet hall lighting.

Installing recessed down lights are preferred wherever possible. This is one of the most common mistakes that lighting design professionals experience. Builder spec versions of can lights can be very inexpensive, and people often assume that laying them out in a regular grid gets light everywhere. Unfortunately, this is not so. The optics of inexpensive can lights often enables only slightly more than half the lumen output of the lamp to escape. In addition, can lights, unless they are adjustable or wall wash fixtures, typically don’t put sufficient light on vertical surfaces, which is where the eye perceives light. With an array of cans, we might waste nearly half our watts and still have a space that feels like a cave because the walls are dark.

Using down lights over the vanity without adding lights on the edge. Standing directly under a downlight, without any light at the corners of the face, creates overstated and unappealing shadows. In the bathroom, using a downlight over the sink is fine to accent the expensive polished nickel faucet you’ve specified, but it’s insufficient for tasks like shaving, tweezing, and applying makeup. For this, we need light at the sides of the mirror at eye level to minimise shadows and provide even circulation. This can be achieved with sconces flanking the mirror.

Employing luminous or halogen sources without dimming. While we are all discovering options to retrofit lighting with more effective, longer lived light elements than incandescent, it is preferably a feasible and significant part of lighting in a residence, given it is dimmable. By dimming, it is possible to decrease energy and heat output, and extend lamp life.

Source and Refernce: https://medium.com/@lightingera.com/why-banquet-hall-lighting-matters-a-lot-5d23e24bd814

%MCEPASTEBIN%