3 Types of Aeration Methods You Should Know About

Posted by Carla Bruni on December 18th, 2017

Several modifications of the conventionally activated sludge handling system have been developed that serve to upsurge the efficiency of the activated slush treatment procedure. These amended wastewater aerated treatment structures are briefly discussed as follows:

Tapered Aeration

As the influent manure after the initial settling process (viz. primary discharge with high BOD, i.e., biochemical oxygen demand) comes into the top end of the ventilation tank, it has a comparatively higher oxygen demand. At this distance from the inlet of the ventilation tank, the oxygen request increases. This understanding has given rise to altering the activated sludge manure treatment process over tapered aeration.

In this, even though the influent is taken at a single position from the inlet end, the sum of air supplied at the inner end place is greater than that delivered at the outer end. For instance in this kind of wastewater aerated treatment organization, about 45 percent of the total air can be supplied to the initial third length of the tank, 30 percent to the subsequent third and 25 percent to the latter third.

Step Aeration

This is one more modification that is centered on the similar concept, i.e., the oxygen request of the mixed liquor, lessens as the distance from the inlet of wastewater aeration tank rises. In this kind of wastewater aerated handling system, the returned activated slush is brought in at the cove end of the aeration tanker, but the primary discharge is taken at different positions from the firth end to some distance away concerning the outlet end.

Step aeration in wastewater is adept at handling shock loadings and stabilizing the oxygen demand in the mixed spirits.

Extended Aeration

This kind of wastewater aerated handling system is categorized by low BOD loadings and is usually used to cure sewage of small groups, housing colonies as well as schools. The airing period is 24 hours or more. The extended aeration can agree to take periodic loadings without becoming upset. Steadiness of the procedure results from huge aeration volume and thorough mixing of the container contents.

Final Words

On the whole, do make sure that you are choosing the right aeration method for wastewater treatment. Making a choice will not be that easy, however if you have made a list of all the requirements and search accordingly then it will turn out to be a lot easier.

Like it? Share it!

Carla Bruni

About the Author

Carla Bruni
Joined: August 10th, 2016
Articles Posted: 25

More by this author