Steps for installing shell mosaic

Posted by Amy on January 8th, 2018

1.We suggest to adopt professional adhesives and joint filler,And parts of our products adopt natural neutral adhesives.(See instruction in the packing).

2.First of all,using the hammer to set the vertical line,and then clean the wall surface to keep the surface flat.

3.Use special ash knife to sweep 2-3mm thickness adhesive after cleaning to pavement surface.

4.Use dentation trowel carve to score out waviness on the flat mushy adhesive

5.Installing mosaic, pay attention to align the joints between sheets with the joints between chips in the same sheet.

6.Tenderly pat the surface of the mosaic and leveling treatment to make sure it is adhesive evernly.

7.About 20 hours later when mosaics is totally adhesive, use the special sponge knife to fill the joint fillers in the gaps,(Soft tool to prevent damaging product surface).

8.Use dry towel to clean and finish the installing finally