Galvanized Steel CoilsPosted by baosensteel on February 9th, 2018 What is the Continuous Galvanized Steel coil ? Galvanized Steel coil is short for Continuous Galvanized Steel coil which width between 0.25~2.5mm,The sheet is pre-heated by a flame,Burn the residue of the surface,create an Iron oxide film on the surface,And then into the reduction annealing furnace containing H2, N2 mixed gas heated to 710 ~ 920 ℃, the iron oxide film is reduced to sponge iron, the surface activation and purification of the strip cooled to slightly higher than the temperature of molten zinc, into the 450 ~ 460 ℃ zinc pot, the use of air knife control zinc layer surface thickness. Chromium solution was finally passivated to improve resistance to white rust. Beautiful steel surface, a block or leaf-shaped crystal plating pattern, and the coating firm, with excellent atmospheric corrosion resistance, at the same time, the plate also has good welding performance and cold forming properties. Compared with the galvanized sheet surface, the coating thicker, mainly for the corrosion resistance of the required pull gold pieces. Suitable Grade:Zn100-PT、Zn200-SC、Zn275-JY Structure classification code:Z-regular spangle,Zinc flower obtained by crystallizing at normal cooling rate can be used for general purposes: X-Zinc flower: Cooling rate controlled specially, Zinc flower size smaller than normal Zinc flower, Suitable for painting and normal Zinc flower Other Occasion; GZ-finishing zinc flower: small Zinc after finishing, suitable for deep drawing and ultra-deep-punch processing and surface roughness requirements of the occasion. Processing performance code:PT-general purpose、JY-mechanical lock、SC-deep-draw、CS-super deep-draw、JY-structure。 Zinc coating number:Z100、Z200、Z275; Example:Zinc coating 275g/m2, 275-JY-Z-Y-B-0.70×700×2000-GB2518-81 Place of origin:BAOSEN STEEL、Galvanized Steel CoiL. 2.2 Japan Galvanized Steel coil Suitable Grade:SGCC、SGCD1、SGCD2、SGCD3 Zinc coating:Z12、Z18、Z20、Z22、Z25、Z27 Place of origin:BAOSEN STEEL、Posco、Nippon Steel. 2.3 Germany Galvanized Steel coil Suitable Grade:St01Z、St02Z、St03Z、St04Z、St05Z Zinc coating:100、180、200、275、350、450 Structure classification code:Z-Zinc flower, X-Zinc flower, G-light whole flower. Surface treatment code: L-chromic acid passivation, Y-oiled, LY-chromic acid passivated plus oiled. Surface quality code:FA、FB、FC。 Size, Shape Accuracy Code: Thickness: PT.A-Normal Accuracy, PT.B- Advanced Accuracy; Width: PW.A- Normal Accuracy, PB.B- Advanced Accuracy; Length: PL.A- Normal Accuracy, PL.B - Advanced Precision; Roughness: PF.A - Normal Precision, PF.B - Advanced Precision. Marking: product name, product standard number, grade, zinc weight code, surface structure, surface quality, surface treatment, product specifications and dimensions, shape accuracy. Example:Zinc coating 275g/m2, 275-JY-Z-Y-B-0.70×700×2000-GB2518-81 Like it? Share it!More by this author |