Stainless steel brazing parts

Posted by Hadley on May 9th, 2018

Welding or Brazing steel pieces might be simply accomplished all by oneself. All you might want to have is basic understanding of brazing and metals. Talked about under would be the brazing process for 410 Stainless Steel Bar. Take a appear and study tips on how to do the stainless steel brazing oneself:

Step one
Within the next step, wipe clean the steel pieces which have to be brazed. After that apply brazing flux on those pieces so that they can be melted and joined with each other.

Step two
Erect a piece of brass plate with an approximate thickness of 1-inch onto the function surface. Secure it using the clamps so that it could absorb the excess heat emitting from the welding.

Step three
Ultimately, join both the steel pieces collectively tightly to create a weld and you are accomplished with brazing stainless steel.

Step four
Now, place the stainless pieces which needs to become brazed around the brass plate and turn on the flame via an oxy-acetylene torch. Then move the flame over the steel, among the two pieces which need to be joined, repeat it until the temperature is hot enough to produce the steel surfaces melt. Make sure that you retain moving the flame back and forth more than the surfaces to prevent damaging steel.

Step five
For starters get rid of all kinds of flammable things in the surrounding location and work surface. Then use a soapy damp cloth to wipe clean the operate surface and clear all sorts of chemical residues left on it. Let it dry completely.

Like it? Share it!


Hadley

About the Author

Hadley
Joined: March 6th, 2018
Articles Posted: 41

More by this author