Installation of the Steel Metal Frame Swimming Pool
Posted by zlmaterial on June 12th, 2018
The steel metal frame swimming pool is composed of two parts:steel metal frame structure and PVC tarpaulin linning. There are three kinds of steel metal pipes to support the swimming pipes, namely U-shaped pipe, connecting pipe at the four conner and horizontal pipe.
Horizontal pipe
connecting pipe at the four conner
U-shaped pipe
Tools / raw materials
Steel pipe bracket: U-shaped pipe, connecting pipe, horizontal pipe
Pool cloth: PVC tarpaulin
Method/step
First transport the metal frame swimming pool to a predetermined installation position. The area of the water park should be flat and hardened. Then, follow the process of installation as follows:
Firstly, take the PVC tarpaulin linning out from the bag and spread it out
Put each steel pipe conponents to the place where it is connected to the pool cloth. When installing, first connect the U-shaped tube through the bottom of the pool cloth.
After the U-shaped tube is installed, install the horizontal tube on the top the PVC tarpaulin linning. Be careful of rough installation to avoid scratching the PVC tarpaulin. The docking hole on the horizontal tube are designed to be matched with reserved hole on the top of PVC tarpualin linning.
Then, the U-shaped tube should be connected to the horizontal pipe. So now, the metal frame swimming pool is basically installed. It has been changed from a “dump” to a “seat” on the ground.
Finally, connect four connecting pipes which are used at the four corners of the metal frame swimming pool and the horizontal pipes. Until now, we can say that the installation of metal frame swimming pool are finished.
Precautions
Do not try to cater to the position of certain parts by mechanical distortion to metal conponents.
Other Products
Flexible and collapsible PVC tarpaulin water storage tank pillow bladder
Flexible and collapsible PVC faric shrimp and fish farming tank
Flexible and collapsible PVC fabric rain barrel for garden usage