Mold & Mildew Control Directions
Posted by anti3protect series on July 5th, 2018
Disinfection / Virucidal / Fungicidal / Mold & Mildew Control Directions
Apply this product undiluted to hard, nonporous surfaces, thoroughly wetting the surfaces with a cloth, mop, sponge, sprayer or by immersion. Treated surfaces must remain wet for 10 minutes.
For Influenza Virus Type A and Human Coronavirus, treated surfaces must remain wet for 1 minute. Wipe dry with a cloth, sponge or mop or allow to air dry. For heavily soiled areas, a preliminary cleaning is recommended.Spray 6-8 inches from the surface, until surface is thoroughly wet. Do not breathe spray. Let stand 10 minutes. Wipe dry with a clean cloth or sponge or allow to air dry. For heavily soiled areas, a pre-cleaning is required. Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse. Do not use on utensils, glassware and dishes. For fungicidal activity: ANTI 3 Protect Series Disinfectant Deodorizing Equipment Spray is an effective one-step fungicide against Trichophyton mentagrophytes when used on hard nonporous surfaces in areas such as locker rooms, dressing rooms, shower and bath areas and exercise facilities. Allow surface to remain wet for 10 minutes.
For mold and mildew: Repeat treatment every 7 days or more often if new growth appears.
Equipment Spray Gallon
ANTI 3 Protect Series Disinfectant Deodorizing Equipment Spraycleans and disinfects nonporous equipment such as wrestling head-gear, boxing headgear, protective headgear, athletic helmets, hard hats, half mask respirators, full face breathing apparatus, gas masks, goggles, spectacles, face shields, hearing protectors, ear muffs and more.
Use ANTI 3 Protect Series Disinfectant Deodorizing Equipment Spray to clean and disinfect nonporous personal protective safety equipment, wrestling head-gear, boxing headgear, protective headgear, athletic helmets, hard hats, half mask respirators, full face breathing apparatus, gas masks, goggles, spectacles, face shields, hearing protectors and ear muffs. Rinse all equipment that comes in prolonged contact with skin with warm water and allow to air dry before reuse. Precaution: Cleaning at 120ºF temperature will avoid overheating and distortion of the personal safety equipment that would necessitate replacement. Use this product to clean and disinfect nonporous athletic mats, wrestling mats, gymnastic mats, exercise equipment and training tables. This product is a mildewstat and will effectively inhibit the growth of mold and mildew and the odors caused by them when applied to hard non porous surfaces.
Like it? Share it!
About the Authoranti3protect series
Joined: December 7th, 2017
Articles Posted: 72
More by this author