Walls and floors Insulation: how it works?

Posted by Johnny Baker on July 10th, 2018

In order to keep as much heat as possible inside your home, it is important to ensure that walls and floors are well insulated with Electric Insulation Blower. This is not only good for the environment, but also for your wallet! Discover expert advice here and avoid unpleasant surprises when you proceed to the insulation of your walls and floors. Enjoy a deliciously warm house in the winter and pleasantly cool in the summer.

Increase your comfort and save on your electricity bill

During the winter, the insulation limits the loss of heat and this can be seen directly on your heating bill. During the summer, the insulation protects against heat and sunlight. Good thermal insulation of home done by a liable insulation blowers and accessories supplier is therefore crucial for saving energy.

How to isolate?

The insulation value is expressed in K levels, determined on the basis of the following elements:

• The isolated place: roof , walls, walls, floors
• The materials used: building materials + insulation material.
• The lower the K level, the better the house is isolated.

For new dwellings, the minimum level K is set to 55. In case of renovation, the value K must be at least 65. To give an example, a house of the seventies had a K value of 180. The difference compared to new insulation standards is important. If you live in an old house, you must definitely go through an isolation cure.

The insulation must be reviewed as a whole

The heat resistance or thermal resistance of a wall is the sum of the heat resistance of all elements that make up this wall. Everything must be isolated, taking into account the different materials. It is important to establish a real 'battle plan' to begin isolating your home and working step by step, starting with the places with the greatest heat loss.

 How does heat loss occur?

Good insulation should always go hand in hand with good ventilation. If you completely close the house by carefully isolating it, you should not forget to rule out all the causes that can create moisture. This may be natural or mechanical ventilation; your house can not become an aquarium. You will find more information in the cool insulation machine supplier. A well-insulated home ages less quickly and requires less maintenance. Combined with good ventilation, the insulation eliminates all possible causes of condensation, which avoids many problems, painting, but also in woodwork.

What you need to know before isolating

Never apply insulation to a wall that shows signs of moisture. Opt whenever possible for insulation along the outside. This limits the risk of thermal bridges and does not reduce the space in the room. The insulation shield must not be interrupted. This prevents thermal bridges from building up and destroying all your efforts.

About us:- Thermal bridges are heat exchangers that are always found at the intersection of walls and floors, around window openings or doors. It is sometimes impossible to avoid them altogether, but you can reduce their effect by placing as many barriers as possible. It is possible to isolate all the built parts of your home.