AT980E 80W Digital & Lead-free Soldering Station

Posted by rchobby1 on July 17th, 2018

  • High performance pluggable four-core heating element;
  • Temperature read out in ℃ and ℉
  • On/Off switch on the right side of the unit.
  • MCU controlled temperature calibration.
  • Simulate bar indicating heating up status.
  • LCD display screen making control visualization.
  • User-friendly menu enables system setting easier.
  • Separate iron stand to save room and to make easier deposit.
  • Buttons(1,2,3) for pre-setting or switching frequently used temperature.
  • Low-voltage heater separated from power supply to keep soldering work safer.
  • Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.

    more info; http://www.atten.com/project/at980e/

Specifications:Packing list:Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) Main Unit: 1 Unit Inner box: 25x21x13.4(cm)
Power:80W Handle set : 1 PCS N.W.: 1.74kg
Heater Voltage:26VAC Iron stand: 1 PCS G.W.: 2.0kg
Temperature range:150~480°C AC cord: 1 PCS Carton: 12 PCS/Carton
Temperature offset range:±50°C Manual: 1 Copy Size: 51.5x44x43(cm)
Temperature stability:±2°C (in still air, no load) Cleaning sponge: 1 PCS N.W.: 24.0kg
Setting method:adjust by buttons   G.W.: 25.1kg
Temperature calibration:digital    
Heater:80W High quality pluggable four-core heating element    
Tip-to-ground impedance:< 2Ω    
Tip-to-ground voltage:< 2mV

Like it? Share it!


rchobby1

About the Author

rchobby1
Joined: June 26th, 2018
Articles Posted: 9

More by this author