How to Solve Canon Pixma MP237 Errors?

Posted by Florisha on July 18th, 2018

Canon Printers are most versatile for both workstations and home-based users around the world. Canon Pixma MP237 name has been not booming with just their printing business, but it also has increased reputation in their other technological end. But still, printer error in Pixma MP237 becomes common for every user, so, you may need to fix Canon Printer Related Difficulties in the same model. Apart from it, in this article, we are going to provide you with some essential steps of troubleshooting and their causes as well as the following:

The most common errors of the Canon Pixma Printer MP237:

1. Error 02-03:

Causes:

You can receive this error message mainly because of paper problems like paper jam, the paper roller is not supporting or if the printer detects no paper inside it.

Solutions:

• You need to start from it the middle by pressing the resume printing. While removing a paper jam, you have to avoid pulling the stuck paper from the front cover. If there are a numerous papers stuck, then you have to start it from the middle and pull out the paper at a time instead of pulling it from the paper tray.

• You can also clean the paper rollers either replace it. No matter, what is the exact reason, you need to check whether the paper roller is ragged out or dirty and also ensure that they are perfectly aligned to the paper.

• Another procedure is that restarting the printer and reloads the paper. You have to also observe the maximum capacity of the paper feeder and their alignment by the depending on the size and type of the paper.

2. Error 05:

Causes:

One of the main reasons for these problems is when the printer ink cartridge has been not installed correctly. Apart from that, it happens also if the wrong cartridge was installed in the printer and when the printer does not detect the print head. 

Solutions:-

• To fix the issue in this model, you need to remove the first canon ink cartridge and install it again. If your printer is supporting multicolour, then you have to make sure that each cartridge is installed to its place.

• Another reason for causing this issue is that your dirty or clogged ink cartridge. Clean your printer ink cartridge and then reinstall it.

• When the maximum page number is reached and don’t know the idea that whether the cartridge still has ink or not, then the printer will show the level of low ink and paused until a replacement is installed. However, you can overcome this issue by resetting it. If you don’t know the instructions for this problem, then you are advised to contact Canon Printer.

If still, those above-mentioned foremost steps didn’t bring the adequate solutions for configuring your model Pixma MP237, then you need to dial at the Canon contact number. You can avail the Canon toll-free number from the Contactforhelp; which is the world’s leading online directory.