Cleaning Products Dublin - Evans Cleaning Products

Posted by Cleanfast dublin on August 27th, 2018

Guide To Using Evans Floor Cleaning Solutions


Regardless of the type of flooring, dirt will eventually build up on it. Soiling that`s brought in from the outdoors under people's shoes, loose fibres from fabrics be they clothes or furniture upholstery, pet fur and dander for those households with cats and dogs running around, smoke particles be they from burnt food in the kitchen, fire incidences, or simply a person smoking while on the premises, oil splatters from cooking activities, grease on the garage floor, sweat and body fat on indoor sporting venues, paint chips, all through to the everyday dust that settles on the surface from the air. These particles gradually build up, and are gritty once people step on them. This is because they get grinded against the surface of the floor, and that abrasive action is like using tiny pieces of sandpaper. The higher the levels of traffic and soiling, the faster the rate at which this abrasion occurs. Then there`s there food and drink spills. From common beverages like coffee and tea that get spilled during the morning rush to head to work, beer and wine during parties and the occasional dinner date, mayonnaise , sauce and yoghurt smudges that wind up on the surface- these create stains that ruin the décor. Ink blots, cosmetic products like nail polish that drips on to the surface, blood in cases of cuts and nicks, vomit incidences, all through to pet urine stains, they form spots that contrast the surrounding colouration of the floor. Getting rid of these dirt spots and stains is part of the floor maintenance program, and Evans has got you covered with quality solutions.



Different floors have different needs. For instance, wood is hygroscopic, and thus susceptible to water damage. Limestone can get corroded, with harsh acidic products eating away the floor. Conventional products used on other surfaces around the house can end up dulling marble surfaces. You also don`t want to dull your polished floors. In fact, the cleaning products should preserve or increase the gloss level. The products should also not wear own the protective finish coats that have been applied onto the floor surface, as it would put it at higher risks of water damage and permanent staining from spills. With the wide range of products from Evans, you can get the cleaning agents that suit your particular kind of flooring. This enables you to ensure that it receives the appropriate care, getting rid of the grime while preserving its structural integrity.



Cleaning Your Hard Floor Surfaces
You have products such as Evans Clean & Shine, which is a neutral floor maintainer, that removes the general soiling that`s on the surface, and brings back that gloss finish. You can use it for damp mopping the floor, and when you want to spray and burnish to increase the gloss level. The Evans Clean & Shine enhances the slip resistance of the surface, and also comes with a fresh floral fragrance that accentuates the ambience of the interior space. On the other hand, the Evans High Glass is designed for use on all kinds of hard surfaces, from marble all through to terrazzo floors. It gets rid of the dirt and grime without dulling the surface, and you can carry out the process through damp mopping or spray cleaning.

There are also the Evans Lemon Gel and Pine Gel, which are used on hard surfaces, for the removal of light to general soiling. They have distinctive scents, and you can opt or either the citrus or pine depending on your décor needs. For the cleaning itself, you can damp mop or use the spraying route.



The Spray Cleaning And Burnishing Process
Here, the goal is to get rid of the light to medium soiling using equipment like high or ultra-high speed floor machines. In effect, you get to remove the soiling, and also improve the gloss level of the surface. Start by putting in place the required safety measures, such as "Wet Floor" caution signs, that way, you won`t have people walking all over the wet area. Once this is done, follow these steps:

1. Vacuum or sweep the floor in order to remove the loose grit particles strewn all over.
2. Take the product you intend to use, such as the Evans Clean & Shine, and add it to the spray bottle.
3. Fix a red floor pad to your high speed floor machine.
4. Proceed to spray a fine mist of the solution onto the surface. Ideally, this should be on the range up to 1 metre ahead of the high speed floor machine.
5. Follow through with the high speed floor machine, and repeat this spray-and-clean approach for the rest of the floor.
- In case you want a higher gloss level, switch out the red pad with a white one, and dry burnish the surface.

The Mop and Dry Burnishing Process
This approach is used where the floor is heavily soiled, and the area also has high traffic. The mopping is carried out to remove the grime, then the burnishing follows. This ensures that the dirt particles do not ruin the results by abrading the surface. Follow these steps:

1. Always start by preparing the floor. This involves placing the cautionary signs, then sweeping or vacuuming to remove the loose dirt particles.
2. Take the required product for your particular kind of floor, then dilute it at the recommended ratio.
3. Mop the floor with this solution.
4. Give the surface time to air dry.
5. Fix the required burnishing pad to your high speed floor machine.
6. Dry burnish the surface to enhance the gloss. This process will also remove any scuff marks that are on the surface.



These products from Evans come with budget-friendly price tags, enabling you to meet the floor cleaning and maintenance needs of your establishment without punching a hole through your wallet. Each of the formulations has detailed instructions on usage, that way you can apply it appropriately to get professional quality results. Continued care of your floor will prolong the life of your investment, while ensuring you enjoy it all through.

Cleaning Products Dublin