Industrial standard anti-vibration mounts and extruded rubber profiles

Posted by Christian Silmaro on August 30th, 2018

Anti-vibration mounts are also called as vibration isolators that are necessary for various industrial and mobile equipment applications. It is essential to choose right anti-vibration engine mount for a diesel engine, an imperfect choice can have wide impacts on the configuration. Common results of inappropriate selection of mount are like structure fatigue, large noise and mount failure. There are different aspects of applications suggested by anti vibration mounts manufacturers to ensure the right selection of these mounts:
  1. Weight to be supported. It can be an engine alone however it may also include weight of transmissions or generators
  2. If the engine used at a stable speed or is its speed is changed throughout the operation. It commonly occurs in marine applications.
  3. If the engine deals with large torque loads. High torque adds to the weight loads on either side of the engine and decreases the effective loads on the other side during torque loading. Usually torque loads are crucial considering the quick changes in engine’s speed.
  4. In marine applications, besides to loads by the engine’s and connection’s weight, if the engine receives thrust form the propeller? In this case, the engine mounts should be downgraded in load capacity due to the combined loadings.
  5. If the engine stationary or is it subjected to being moved around. If an engine is just running when in static position, the travelling loads, it faces can result into overload on anti-vibration mounts due to considerable forces in the travelling direction. Internally interconnected mounts can deal with loads occurred during motion.
It should always be kept in mind that vibrations are absorbed by permitting controlled movement of the engine by using resilient engine mounts. It can also be used to dampen some of the movement when viscoelastic materials like rubber are utilized in the mount. Usually, the more anti vibration allows the engine move the better the vibration resistance. It also involves limit for this alternative.
Single cylinder engines are more difficult to balance as a single piston and associating rod make it more troubled to balance. Therefore for engines with single cylinders, the vibrations produced of problem are first order. In double cylinder inline engines have both pistons moving up and down and hence show the same situation as occurs in the single cylinder engine. Therefore in double cylinder engines the vibrations produces are first order RPM 60.
Other essential industrial product is extruded rubber profiles and tubes. You can contact extruded rubber profile manufacturers that include vast product line such as U channels, angle extrusions, special extruded tubing and seals, refrigerator door seals, solid strip- cord, sealing strip, p strips and more.
You should choose the products that are made as per the industrial standards such as ASTM, MIL, and SAE. There are reputed manufacturers who offer the high quality rubber extrusions and anti-vibrant mounts for engines. Take the benefit of industrial experience and skills and expertise, so you are rest assured that you are receiving quality products for your application.

Like it? Share it!

Christian Silmaro

About the Author

Christian Silmaro
Joined: September 11th, 2015
Articles Posted: 175

More by this author