Do you know the right way of Chain Link Fencing?

Posted by HelenaNelson on September 14th, 2018

Want to boost security at your house? Look up to fence your building. Constructing a chain-link fence is a simple process. But, it takes time to choose anything to suit your need. Here are few tips, following which you can do Chain Link Fence Installation in California, properly and sustainably for many years.

Sketch Property Lines

You know your limits. Make sure that you adhere to the property limit to avoid over-crossing. Set your posts at least four inches inside of your property line. It will give you a margin if, any urgent growth is required to extend the limits. Make sure that your line does not encroach past your property.

Set Terminal Post to Avoid Encroachment

You must remember while digging post holes, there are underground cables or pipelines. First, determine the location of the end, corner, and gate posts. Next, dig the holes to the appropriate depth. Mark all posts with chalk or thread, for the correct height of the fence. The terminal posts should be 2 inches higher, and line posts should be 2 inches lower. If you don’t want to do such an arduous task, you can also call any company to do Chain Link Fence Installation in California.

Locate and Set Line Post

Later, you can mark the grade line on all line posts. You should measure the top while doing so. Then, reference the distance between the terminal posts. The line posts should have the exact spacing.

Then, stretch a mason’s line from outside of terminal posts. The line post holes should be properly lined to keep in the center of their holes. These centers will be further lined-up with the terminal post centers. Then, dig the line post holes and set them properly.

The quick view to applying fittings to terminal post:

1. Check the materials list and identification of fittings

2.Finish installing the posts, and solidification of the concrete

3. Place the brace bands on terminal posts at a distance of 10-12 inches

Apply Top Link

The last, but most important part of the Chain Link Fence Installation is, attaching loop caps. They are fixed with the top link hole, beginning from the outside of the fence. Join it with the wedged end where it is required. Its end should fit into the final point of the chain link fencing on the terminal post.