4 DIY Repair Tips to Avoid Gutter Replacement

Posted by Sam Jones on October 1st, 2018

No house can withstand without a gutter system as it holds a major part of the drainage system. They are essential in every house as they collect the rainwater disposing of it properly. The rainwater brings along much debris that causes your gutter to clog that is why it comes necessary to keep them clean. The debris inside can also cause damage you end up with gutter replacement.

When your gutter needs repairing, there are 4 DIY gutter repairing tips that can help you do it yourself. Follow them to avoid expensive gutters replacement in Mableton GA.

Unclog the gutters

Unclogging the gutters is not difficult when you are not afraid of dirt and climbing down the ladder. Unclogging can prevent numbers of issues and can save you a fair amount of money that you may spend on repairs. Precautionary measures can prevent a number of issues so it's better to do it before. All you need to check is that your ladder is secured, and you have gloves to pull out the dry debris. After that use a garden hose that will help to keep a proper flow and weight off the structure. After cleaning the gutters use gutter covers for protection.

Realign them

Even after cleaning and unclogging, your gutter is not draining water properly towards downspouts, it is may be due to the wrong alignment of the gutter. Though it is not clear that you need a gutter alignment or not, but gutters are designed in a bit tilted shape for proper drainage. So, whenever you experience a disturbance in the water flow, look for the alignment. It’s a straightforward task and can be done easily.

Remove the rust

Rust is common with the gutter, whether they are metal gutters or K style gutters in Mableton GA. So, whenever you spot rust on a metal gutter, take immediate actions before it leads to more damage. Wear safety glasses and use sandpaper to remove the rust from the smaller portion. Check for cracks and fill up the cracks if any by applying primer. Wait for some time until its dry, apply the second coat.

Fix the Leaks

Leaks are usually found in the gutters near the joints. These joints are made watertight with rubber seals or gaskets. When experiencing a leak in the pipe, remove the dirt and debris from around the seal. If the seal has worn completely it’s easy to replace easily it instead of replacing a gutter.

An additional tip, fix the downspout. If there is any loose nut, tighten it. You are good to go for saving your money.