What are the Features and types of reservoir plates?

Posted by Ainsley Aiken on October 24th, 2018

Experiments in the laboratory are conducted with the help of a few must-have tools. And one among them is the reservoir plates. These types of plates are fundamentally used to store any kind of liquids. The best is that the plates come with longevity as it is mostly prepared from material like propylene. And each of the plates consists of approximately twenty-four cavities.  Now let’s dig further to collect some more valuable information on the reservoir plates.

Interesting features of the reservoir plates:

• First of all, you should note that the Agilent Reagent Reservoirs are either made of a single cavity or multi cavities which are designed to stand fit for any type of the pipette.
• The inside wall of the plates is designed with graduation marks which are again designed in the shape of a trough.
• While either end of the Agilent Reagent Reservoirs has a well-tended edge so that one can easily pour off the liquid from there.
• There are some of the reservoir plates which have automated arms with more elaborative designs in order to reduce the pressure of high volume liquid. In fact, it also has baffles to prevent any kind of splashing of the liquid.
• Apart from everything, it is important to mention that the reservoirs are so designed that it can work both automated and manual.

Types of reservoir plates:

• Pipette reservoir plates:

This type of reservoirs is basically capable of holding liquids in 25 or 50 or 100 ml. In fact, they are available in both sterile and non-sterile formats. The best feature is that these typical plates got a proper certification mark and are non-pyrogenic in form. Moreover, just note that the primary material used in the process is polystyrene.

• Channel reservoir plate:

This kind of plate is designed in V-shaped cavities which are made from top quality chemically tolerant polypropylene. Each of the wells is capable of holding 5m of liquid. Most interestingly these crevasses are secured by means of sealed lids. Not only that it is safe as well because it goes through proper sterilization.

• Propylene robotic reservoir plates:

This type of typical reservoirs is found in two basic shapes either have a flat-shaped bottom or have a complex design. Moreover, it finds its compatibility with robotic handles or crane plates.

From where can you get the reservoir plates?

For any kind of laboratory requirement, you should land up on the site http://lsdc.com/product-category/agilent/    here you will get all sorts of Agilent Microplates.  For any kind of query regarding the microplates simply drop your message here.

Source URL - https://bit.ly/2CAAWup