Easy Car Care DIYs to Save You Some Extra Pounds

Posted by Tyres and Exhausts on November 5th, 2018

You know how expensive it is to take your car to a garage for servicing. Doing it once every month is just out of the question even though you know it’ll help in promoting better car performance.

So, why not get your own hands a little dirty and try these DIYs at home! Not only will this save you money but will also enhance the functioning of your car components.

DIY vehicle maintenance tips

Battery

Batteries help in the operation of the air conditioner, headlights, dashboard lights, windshield wipers, automated rear view mirror, and many other components.

Hence, the optimum health of your car battery is essential. Battery terminals are its most crucial part, just why taking care of them is nothing short of vital. You can use a terminal protectant spray to keep the terminals cool, and you don’t have to worry about early replacements either.

If you must, let us see how you can do it.

Remove the negative terminal before you remove the positive one. You can keep one flathead screwdriver handy just in case those terminals are stuck. However, remember not to put excess pressure on them.

Clean those posts by applying some mild cleanser. If you prefer homemade products, then make one with water and baking soda.

Wash off the soap and clean it dry before placing the battery terminals.

Radiator Flush

Your vehicle’s cooling system and radiator require cleaning for effective and efficient functioning. Over time, the radiator starts building up deposits which can disrupt the cooling system. Hence, you need to go ahead with a radiator flush, especially in summers, to avoid engine overheating.

An economical yet quick procedure, radiator flushes can be done easily at home. Before doing it, consult the owner’s manual to know the duration between two clean-ups and refills.

How to do it?

Ensure your four-wheeler is cool before you start the procedure.

Drain the old coolant completely by unscrewing its drain plug.

Now take out that radiator cap and add the cleaning solution using a funnel. Fill the radiator’s remaining space with water. Then replace its cap.

Drive your vehicle to heat it up. Now, turn the heater on to its highest position for 10 minutes.

Let the engine cool down before you drain all its contents and refill it with new coolant.

Even though the procedure sounds lengthy, it’s not that difficult. However, you can seek a professional’s help from garages such as Add Tyres and Exhausts for a car repairing at Pickering.

Engine oil change

The engine oil is essential for optimal performance of its multiple moving components. You will need to maintain above-minimum engine oil levels to avoid in-component abrasions or worse, failures. Go ahead with an engine oil change in Pickering yourself. Empty the oil first before using a funnel to fill it. Make sure you oil the filter gasket before you put it on again.

Make the best of these DIYs. Save up on expenses without compromising on performance by just being a smart driver!