THE CONSTRUCTION TECHNOLOGY OF VARIOUS EQUIPMENT AND NOTICESPosted by Thomas Shaw on November 12th, 2018 Zibo debang industry R & D and production of various equipment, loved by the majority of users, the detailed construction process of lacquer and matters needing attention, to help customers can more handy in operation process. A wood and stone (stone particle layer) construction method for spraying. The tools are air pump and spray gun. The primer and top coat can be sprayed or rolled. Two, stone construction technology 1.: clean the face processing base, convex, uneven edges and other locations, cleaning dust. 2. scraping putty: according to the flat condition of the base surface, it shave to two times for the special waterproof putty. The error value of the flatness control is less than 4mm. 3. paint primer: a roller or a spray gun is used to paint the primer evenly. The purpose is to waterproof seal the alkali and color the seams. 4. stitching paper: according to the design requirements of the classification, measurement, line, sticker, the part of the seam with the beautiful paper. 5. by spraying lacquer material, according to the design requirements of the pattern size, adjust spray gas sense of ups and downs. The number of spraying is also adjusted according to color, and is sprayed 1-3 times. 6. remove the Striped paper. 7. brushing transparent topcoat: roller coating or coating transparent protective finish 1-2 times, improve the self-cleaning performance of lacquer. 8. finish cleaning and finish. Note: 1. the primer is the color of the seams, and has the weatherability. More info: http://www.dbpaintmachine.com Like it? Share it! More by this author |