Maintenance of Sewer System

Posted by Great Rohrreinigung on November 26th, 2018

Many house owners find difficult in cleaning sewers of their house. But every home owner has to perform this job as it important to clean the hoses and sewer. The sewer covers reduce the maintenance work from clogs caused by leaves, pine needles, seeds, and other debris. These debris creates retention in the flow of water. This cover varies from a material, cost, and installation techniques. The investment depends upon the type of performance you want in your house. This is when they look for the kanalsanierung Ratingen.

The clogged sewers can eventually lead the wall and roof of the house to destroy. To avoid this kind of terrible result, you should prevent the entries of leaves and debris by doing the kanal dichtheitsprüfung wuppertal. This type of situation goes more terrible in the rainy season. With the help of the Leak tightness of the products which is the ongoing concern for various designers of the product, manufacturers as well as the users. The Leak tightness testing is basically the dynamic gas for the purpose of the micro-flow measurement for the purpose of detecting of existence of additional path of leak flow or micro-channels. To clean debris and leaf, you need to consider mentioned below steps.

• Steps for Proper Cleaning

1. Requirement to clean the sewers
2. Broom
3. Sewer screen
4. Sewer caps

Installation of Sewer Screen

The very first step that you need to take is to install the sewer screen. These are made up of metal and plastic material that has holes which allow the rain water to move in the sewer without any debris and dirt. The size and the style of the sewer guard vary from one manufacturer to other. In some guards, you will find very small holes that resist the entry of tiny particles, but if it is not installed properly then you can find difficult in flowing water. When the lid or the screen is installed the kanal dichtheitsprüfung bergisch gladbach is conducted that there is no leakage of the gas which could be very harmful.

• Sewer Caps

On the sewer system, you need to install the sewer shields. They are the good protector, which don’t allow debris like leave and other material to move in the sewer. They are placed on the top of the sewer system.

• Cleaning Floor

Try to keep your floor clean, because these dust particles move in the sewer and block it. The leaves fall from the tree, get on the roof which ultimately move in the sewer due to air. You must clean out the roof once or twice in a day.

Source Link: https://bit.ly/2RHPUUA