Cope with Jaw Crusher

Posted by yoyocrusher on December 24th, 2018

After having worked for a certain time, the Construction Waste Crusher may appear the phenomenon of the production cannot meet the factory production standard. So , when this happens, how the customers that use jaw crusher to deal with it?

1.Replace or increase crusher

2.Replace motor wiring

3.Adjust the discharge opening to the nominal discharge opening provided by the instruction and add a fine crusher

4.Check pitch size of the toothed plate. If it doesn't meet the standard, you must replace the jaw plate and adjust the relative position between the fixed jaw plate and the flexible jaw plate. After the tooth crest and dental root matches, you must fix and compress them in order to prevent replacement.

5.Increase voltage in the working place so as to make it adapt to host override requirement.

6.Replace the bearing or the moving jaw

There are many reasons that cause the jaw crusher cannot meet the factory production standard. It may the own reason of the crushing equipment or the other venues and facilities reasons. So, the operator should prescribe the right medicine and reasonably solve the problems. Only by doing that can we ensure the normal operation of the crushing equipment