Five Factors Affect the Production of Jaw Crusher

Posted by yoyocrusher on January 17th, 2019

This article is mainly about the key factors affect the production of Ghana Gold Crusher . Generally speaking, there are a lot of factors affecting the production capacity of jaw crusher, roughly speaking, five key factors. Now I will cover the five key factors and offer some solutions for them.

Material Humidity: When the material humidity is higher, the material will adhere to the inner wall of jaw crusher easily, meanwhile, the blocking will be caused easily during the process of discharging and transportation, which will decrease the sand making production of jaw crusher. In order to solve this problem, the material humidity shall be controlled strictly. If the material humidity is higher, we can use the method of sun exposure or air drying to decrease the material humidity. Material Components: The finer the material is, the more difficult the sand making process is, so it is easy for the fine material to influence the transportation of jaw crusher. Therefore, for the finer material, it is better to sift them in advance. Sifting the fine material out can avoid affecting the normal operation of jaw crusher. Material Hardness: The harder the material is, the more difficult the crushing process is and the more serious the wear on equipment is. so for hard material, the crusher will have low crushing speed and ability. Material Viscosity: The greater the viscosity of material is, the easier the adhesion is. It is easy for the material with high viscosity to adhere to the inner wall of jaw crusher. If not cleaned up in time, it will affect the work efficiency of jaw crusher, even affect the normal operation of jaw crusher. Therefore, it is better to choose the crushing material with low viscosity. Material Fineness: The higher the demand of fineness is (that is to say, the thinner the material is), the smaller the crushing ability is. Generally, it is set up depending on the specific requirement.