Common Electrical Issues Found In Commercial Buildings

Posted by Jeffrey Smith on January 25th, 2019

Because of their complicated wiring systems, industrial and commercial buildings are much more susceptible electrical problems in comparison to domestic properties. To make sure your commercial building stays safe, this is critical to have routine checks done by a professional commercial electrician in South Wales. Listed here are a few common electrical issues that can be seen in commercial buildings.

Flickering Lights:

Flickering or dimming lights aren’t great for any business, but sometimes just replacing the bulb doesn’t do the trick. When bulb replacement doesn’t work, a more serious issue such as a bad connection in the circuit might be the reason. This issue should be addressed as soon as possible; otherwise, this could lead to long-lasting damage & may need a full repair.

Tripping Breakers:

If a circuit breaker starts to trip, this is prompted by them either because of being overloaded, ground fault or a short circuit. If not sorted out, this issue can become a fire hazard for your building. The best thing you can do is hire a reliable commercial electrician in South Wales to determine whether you need to add a circuit or upgrade the whole electrical system.

Wrong Wire Length:

Some guidelines should be followed when stripping wires to expose the metal core when making an electrical connection. Incorrect wire length can prompt problems afterwards that’ll disrupt the power connection & cause short circuits. A competent electrician knows that a 6inch length is a standard for cables in the outlet box.

Insecure Wiring:

Appointing a part-time electrician to install your commercial building’s wiring is not a good investment, because there’re instances where the cables are stapled too firmly, promoting damage to the cable itself. Overlooking this issue can guide to electrical fires & issue with the devices and lighting in the workplace.

Loose Connections:

Loose connections, which may take place after renovations & repairs in the commercial building, can guide to overheating & arcing, which in result can guide to injuries. A licensed and certified electrician in South Wales is trained enough to create safe & firm electrical connections that won’t get bent and damaged.

Defective Installation:

Wrong installation of air-conditioning, telephones, water heaters, and other appliances in commercial buildings can guide to fire hazards. That’s why you must consider hiring a professional electrician when fitting any devices in the workplace that uses electricity. Expert electricians are trained to check for mistakes & issues in the building’s electrical work. They’re also familiar with the codes & regulations of installation and upkeep of electrical equipment.