GranitePosted by updatebeltroad on February 14th, 2019 The granite used in the granite production line is evenly fed into jaw crusher by vibration feeder for rough crushing, and then fed into counterattack crusher for secondary crushing of stone. If you want small particles such as stones, you can configure the number of layers of vibrating screen according to the size of stones you need. If you need two kinds of finished stones, you can configure two layers of vibrating screen. If it is used in sand making, it is necessary to crush the sand with ultra-fine grain size. Through the crusher of the sand making machine, 0-5mm sand can be obtained. Then the mud and some impurities in the sand can be cleaned by the sand washing machine, and the clean sand and stone can be obtained. Origin of Granite Production LineProduction line diagram Granite is an igneous rock formed by the condensation of magma beneath the surface. Its main components are feldspar and quartz. The etymology of granite is Latin granum, meaning grain. Because granite is a diagenetic rock, it often forms well-developed mineral particles that can be distinguished by the naked eye, so it is named. Granite is not easy to weathering with beautiful color and appearance and its luster can be maintained for more than 100 years. Because of its high hardness and wear resistance, it is also the preferred material for open-air sculpture besides being used for high-grade architectural decoration works and hall floors. Granite crushing production line is a stone production line developed by Henan Zhengyi Machinery aiming at the characteristics of high hardness and wear resistance of granite. The production efficiency of the stone production line is high. If sand making is needed, only one sand making machine is added in the middle, which can fully meet the needs of users. Work-flow of granite production line1. Raw Material - Feeder - Jaw Crusher (Stone Machine) - Counterattack Crusher - Vibrating Screen - Finished Products Like it? Share it!More by this author |