Installation of tiles on floor and walls not only makes the place visually elegant but also renders durability to the house which saving it from problems like seepage, mold formation, and other such issues. London tiling has been widely preferred by the homeowners who look for a permanent solution for a well-fashioned home.
Things to keep in mind while laying tiles
Figure out your requirements for the number of tiles by measuring the area as per square meter. Condition it as per the floor or wall tiles application as both may vary in size.
Keep the requirement of extra pieces in mind, as you may not be able to find the same tiles again.
Buying sure you bought the same sized tiles, survey the boxed carefully for texture color and size
The method of application for both floor tiles and wall tiles differs; floor tiles need a well cleaned and flattened floor to lay tiles in sequences without confusion, while wall tiles require a scraped wall that has uneven surfaces that can facilitate in tile installation.
Make sure you understand the difference between adhesive and grout and also their usage. For instance, if you are aiming at installing natural stone tiles on the wall or floor, it should be sealed using a sealant before lying and should be grouted afterward.
Keep the material specific to the installation location, for instance, the bathroom requires waterproof tiles while entry tiles should be heat and dust resistant.
Other than visual impact pay attention to the durability, slip less quality and other important factors that can impact on the life of the tiles.
If you are planning for mosaic or patterned tiles lay them first to set the pattern and then fix them.
Use an article like a pin to set the depth point of the tile or it will be rugged on the surface level to form incongruity. Mark lines so as to keep it straight.
Rather than covering a whole, make small area and work on them. The process could follow setting the margins, check the depth laying the tile, marking the spot, applying adhesive, applying pressure on it and leaving it untouched and shifting on to other tiles. The superfluous adhesive should be removed immediately.
You may encounter instances when tiles are bigger in size than required, for that you need a tile cutter can bring it to the required size. get a cutter for you carefully
Let the adhesive dry for a day and then apply grout on it. Fill all the gaps or it would lead to weed growth after some time.
Keep things like temperature, humidity, in mind as this may leave a devastating impact on tile installation of not performed in accordance with these factors.
Tiling Contractors of a particular area are conversant withal such factors and know how to avoid difficulties. Seeking their assistance would help the amateur find the right measure.
Like it? Share it!
About the Author
Mario Pop Joined: February 18th, 2019 Articles Posted: 7
