Common Categories and Setting Methods of Smart Network Switches
Posted by unipoeunipoe on February 27th, 2019
24 port or 48 port Gigabit uplink 10/100M smart network switch 16, 24, or 48 port full Gigabit smart network switch Stacked 24 port or 48 port Gigabit uplink 10/100M smart network switch Stacked 24 port or 48 port full Gigabit smart network switch POE 10/100M or full Gigabit smart network switch
Because of the built-in operating system, in a sense, a smart switch can be regarded as a computer, and of course, it can be managed. At present, there are mainly the following management methods: 1. Through the WEB management, the administrators can connect the switch with a common computer. After inputting the switch's IP address (can be self-set or default), they can see the management page and manage the switch. 2. As for the TELNET remote terminal management, some of them provide a simple menu, others can be managed through the command, the general CISCO switch has a complete set of management commands. It is worth noting that the command has different modes, users of different levels use different commands. 3. As for SNMP management, we can manage and monitor switches through some SNMP software. The main setting methods are above, and the high-end switches are all managed by commands.Also See: Smart Network, Setting Methods, Network Switch, 48 Port, Switch, Smart, PortTop Searches - Trending Searches - New Articles - Top Articles - Trending Articles - Featured Articles - Top Members
Copyright © 2019 Uberant.com562,212 total articles and counting.