Quality Grinding Mill Bearings At Work

Posted by birder2525 on March 27th, 2019

Quality grinding mill work, the need for the internal parts of each other, the status of these parts is very important, but in the production will inevitably be damaged, the damage is due to a variety of reasons, the core of the production of bearings Equipment, the same, in addition we know that the quality grinding mill is used to produce fine powder, so the production process of dust problems can not be completely avoided, then if the dust into the bearing, then what would happen? ?

Ultrafine grinding work, the need for the interaction of internal parts, the status of these parts is very important, but in the production will inevitably be damaged, the reasons for the damage is diverse, bearing the core of the production equipment to That is the same, in addition, we know that quality grinding mill is used to produce fine powder, so the production process is difficult to completely avoid the dust problem, then if the dust into the bearing, then what will happen?

(1) The more direct impact of the quality grinding mill bearing into the ash is to increase the friction when the bearing rotates, hinder the normal operation of the bearing, make the equipment run slowly and delay the production efficiency;
(2) The mixture of dust and lubricant will not lubricate the lubricant, the dust will accumulate too much and the lubricant will be mixed into the dirt, blocking the bearing to prevent it from running. At this time, the bearing of the quality grinding mill will be locked and must be locked Downtime
(3) slow running, locking are fault, promptly ruled out to resume normal production, but more deadly dust damage is caused by quality grinding mill of the bearing serious wear and tear, shorten the service life, friction caused by dust resistance, lubricant lubrication effect is not good Will cause serious bearing wear and tear, wear to a certain extent will not be able to operate normally, need to replace the new bearing parts before;