Steps to setup Hp wireless printer setup

Posted by Hpprinter supportassistant on April 1st, 2019

There is a different kind of methods used to convert HP printers to hp wireless printer networks. Printers with a displays screen typically provide a front panel wireless setup wizard which is accessible from the hp printer wireless setup menu. The Wireless Setup Wizard will display a number of remote networks. From these networks you have to select the network which you want the printer to be connected, Now you have entered your wireless password if the network is under security. Printers without displays screen will use a software driven process called USB Setup of Wireless which uses a temporary USB cable connection between the printer and computer to configure the printer. You will run the printer software on the computer and follow the software instructions which will guide you through getting the wireless printer connected. Keep in mind that the computer must be also connected. A wireless printer contains a wireless adapter that can connect to a wireless network and allows computers and smart devices connected to that network to use the printer. Due to the connection is wireless, you can place the printer in any desired location in your home. But it is important to make sure the location you choose for the printer provides a strong signal between the printer and the wireless router. You should switch to hp wireless printer because the biggest advantage of a wireless printer is that you do not worry about to be placed it next to a computer or wireless router, but can be placed anywhere in your home where you have a power switch available. Another advantage is that any of the computers connected to your network by either a wired or wireless connection can use the printer after you have installed the printer software on each computer. Your printer will use the same wireless security type as the wireless computers on your remote network and is no less secure. One more thing is that the presence of your wireless printer on the network does not make the network less secure. Another common way to printers with and without displays screen is Wi-Fi Protected Setup (WPS). There are two methods available. First one is push button method which requires you to first initiate WPS on the printer and then push the WPS button on the router if your router supported it. The second one is the PIN method, if the PIN method is used, the printer will provide a PIN code which will be entered into the router.

To install the HP wireless printer drivers, follow the instructions which provided below.

1. The first step is Unbox printer.

2. Then Check the contents of the wireless printer hardware and accessories and try to search the printer support and other fills for the printing job.

3. After that put the paper in the tray of your printer.

4. Then Connect the printer to the power cable and turn on the device.

5. Then place the ink cartridges and start printing

If you are unable to set up your hp wireless printer feel free to contact our support team they will assist you to set up your printer.