Find the best A286 Taps

Posted by Jarvis Cutting Tools  on April 5th, 2019

There are cutting tools which provide highly consistent quality threads that are used in aerospace, automotive and for general applications. The manufacturers of these fasteners work with very near profit margins so the taps that they use must be economical and generate long life for tools and work at a very high rate and very low cost.

A fastener that is of extreme importance is A286 which is produced by a company that has been the transmitter of the product line of Jar hook. It has been the best tap for fasteners and passed all the tests in tapping speed and tool life in the competition.

Aerospace Fastener Taps

Aerospace fastener taps are designed and created with a combination of steel substrate that has high speed. The free cutting geometry and the surface treatment of Titanium Carbo-Nitride make the product the best choice for manufacturing companies of aerospace. The benefit of A286 is:

  • Designed of high-quality material
  • Dependable high-quality threads
  • Built for best tool life
  • Obtainable in a variety of configurations

A286 Taps has proprietary geometry and increases speed. It can also increase tapping speed and optimize cycle times. Male center taps are removed for shorter tap throw. It is designed with geometries that are free cutting. It is also provided with surface treatments for high performance. Some of the features of this tap are minor control diameter and special thread forms.

Coolant Fed Taps                              

Coolant Fed Taps require the correct application of coolant to decrease friction and ease the build-up of heat. Coolant is directed to the zone of thread formation to provide the best threads. The adding of right PVD surface treatment will help the material to flow and decrease surface friction. The blind hole application and threading can profit from additional lubrication and reddening of coolant fed taps. There are companies that offer far-reaching tooling fed with coolant for threading internally. The coolant channels on the inside lead the cutting fluid straight to the cutting zone.

Coolant with pressure helps to cool the work piece and tool while helping in chip evacuation. You can get different configurations of coolant fed taps, sub-micro grain carbide substrates, and premium HSSE. To help with chip flow and increase tool life different PVD applied tuff coatings are obtainable.

Custom Taps

There are companies in the United States that prepare standard or special dies and taps for over 40 years. They offer different types of taps which include Acme Sets, Acme, 2G Tandem Acmes, 3G Acme, Cobalt, Carbide, British Whitworth, Trapezoidal, STI, Pulley, Pipe, NPT, NPSM, NPSI, NPS, NPSL, NPTF, NPSF, Extension, Form, and Metric

They have wide-ranging sizes. Besides they also offer special taps built as per your P.Ds in both left and right- hand taps together with combination taps and drill. A custom or special tap can convey a wide range of variables in the making of internal threads. In common talk, the term refers to taps with a special pitch, diameter or both. If the size of the tap does not conform to the United States cutting tool the common limits or sizes are considered special.

For more information click here www.jarviscuttingtools.com.

Like it? Share it!


Jarvis Cutting Tools 

About the Author

Jarvis Cutting Tools 
Joined: February 25th, 2019
Articles Posted: 6

More by this author