Learn How To Troubleshoot Canon Printer Error 6000

Posted by Roy Pherae on April 12th, 2019

Canon printers are popular across the globe due to its quality printing technology but, it can also show technical errors from time to time. According to a majority of users, one of the most commonly occurring issues is Canon printer error 6000. So, if you are experiencing this error in your printing machine, know that you are not alone. Fortunately, there are a few troubleshooting techniques to resolve error code 6000 from Brother printer.

So, if you want to understand the underlying causes of this printer issue and some technical fixes, keep reading this article. Here, you will get to learn the solutions with step by step guide to keep your Brother printer free from error 6000.

Possible Causes of Getting Canon Printer Error 6000

If you want to know why you are receiving a notification saying canon printer error 6000, go through the following points:

  • Due to any blockage in the printer’s feed tray in the form of dust, dirt or paper pieces, it can generate error code 6000.

  • When you give multiple printing command or tasks to your Canon printer, this error can show up.

  • Any kind of physical damages in the printer or scanner unit can also trigger error 6000.

  • If there is any scratch or smear in the line feed section, your Canon printer can produce this error code.

  • For some reason, if you are facing an issue with fitting the tray into your printer, it can also cause 6000 error code.

Troubleshooting Tips to Resolve Canon Printer Error 6000

If you want to remove the annoying error 6000 from your device, try the following solutions.

Solution 1 - Clear Paper Jam, Dust or Stuff and Restart your Canon Printer

You need to first check if something is blocking your printer’s tray to close or open properly. So, you will have to remove these particles or paper pieces from your printer to fix error 6000.

Also, shut down your Canon printer and disconnect all the cables and power cord for say 50-60 seconds. Then, reconnect the power supply and connecting cables between your PC and printer and switch it on. You can repeat this process a few times to check if you are receiving error 6000.

Solution 2 - Fix Scratch and Smear from Line Feed

If your printer is showing error code 6000 due to problems in line feeder, you can fix it by cleaning the EJ and LF slit films with a non-corrosive solution. Also, pay attention to the cleanliness of your Canon printer and keep the jams away to avoid error 6000. If there is any defective part in your machine, you need to contact an expert to resolve these hardware problems. This includes issues with the sensor, logic board, paper tray, and paper feed units.

In case,  you are still getting Canon printer error 6000 after trying the solutions discussed in this article, you can consult a professional. So, you can get in touch with a printer technician and ask for fixes to troubleshoot error code 6000 in Canon printers.

 

Like it? Share it!


Roy Pherae

About the Author

Roy Pherae
Joined: February 2nd, 2019
Articles Posted: 3

More by this author