Some Quick Fixes For Your Irrigation System

Posted by Austere Pumps on April 13th, 2019

For your lawn to remain green all through the year, it is necessary to get a good irrigation system installed. You may decide to depend on nature for rainfall but this may disappoint you and before you know it, the entire garden that you spent a lot on has turned yellowish. However, by installing an automatic system, you can be able to avoid this. There are different types of irrigation and Grease Arrestor systems that can give you the best results.

That said there is no guarantee that because you have a good sprinkler system installed you will not need repairs. Sometimes, even the best system will break down and you may need to call in reticulation and Grease Trap services to come and help. However, before calling a professional, it may be better to check that the issue with the system is not something you can handle. Unknown to most homeowners, it is possible for them to handle most of the problems that occur with their system. While you may not need expertise level skills to be able to correct issues with your system, you may still need a multi-meter to be able to detect the problem. Some issues that may occur with your system are discussed below and possible quick fixes suggested.

Faulty sprinkler head

To identify issues with sprinkler heads is not very difficult. You just need to look out for broken or cracked heads. Another indicator is placed where water no longer sprays normally or where water has completely stopped flowing. The simplest fix for this type of problem is to get the head replaced. This may require digging around the head to expose the riser. You can also get assistance from Grease Interceptor for most favorable results. If you decide to do this repair yourself, make sure to call the company that installed the system so you can be sure where the lines are. If the problem is that the heads are blocked, simply clean the head and replace it.

Low-pressure issues

If the sprinkler is spraying low volumes or some parts are not spraying at all, what you should be looking or is the pressure at the valve. Check that the valves are fully open. If the valves are already opened, you may have to replace the valve. If there is a leak, locate it and seal it. If this does not work, replace the valve. Another cause of low pressure may be that the pipes are crushed. If they locate them and fix accordingly. You should try your hands at Fat and Oil Removal which is very useful for your procedures.

Problem with zoning

Most systems are divided into different zones. Each zone designed to be controlled by an electric valve. Any zone that is not functioning properly may be as a result of an electrical problem. If all the electrical connects are correctly connected, you should test the voltage in the zone that is not working to see if it falls within the required range.

Like it? Share it!


Austere Pumps

About the Author

Austere Pumps
Joined: March 20th, 2019
Articles Posted: 4

More by this author