CNC lathe processing technology

Posted by qianjiu on April 30th, 2019

  I have been operating automatic lathe processing for a few decades, and I have accumulated some processing skills and experience of automatic lathes, and communicated with my colleagues. Due to the frequent replacement of machined parts and limited factory conditions, we have been debugging and completing the parts processing for ten years. The summary of the operation skills is divided into the following points.

  Knowing the know-how of automatic lathe processing, precision automatic lathe machining is a very rigorous process. Whether for the pass or other processes, the precision and size are quite strict requirements. Then, what are the requirements and standards to be followed in the processing of automatic lathe parts to ensure low or even zero rate? Below we will introduce the specific requirements and standards for the processing of automatic lathe parts:

   For the automatic lathe machining of precision parts, the size is mainly required. For example, the diameter of the cylinder is strictly required. The positive and negative errors are qualified parts within the specified requirements. Otherwise, they are all unqualified parts; the length, width and height are also strict. Requirements, positive and negative errors are also specified, such as an in-line cylinder (take simple basic components as an example), if the diameter is too large, beyond the allowable range of error, it will cause, if not inserted, if the actual diameter Too small, exceeding the lower limit of the allowable negative value will cause the insertion to be too loose, and the problem of weakness will occur. These are unqualified products, or the length of the cylinder is too long or too short, beyond the allowable range of error, are unqualified products, are to be scrapped, or reworked, which will inevitably lead to increased costs.

   The second is advanced precision parts processing equipment and testing equipment. Advanced processing equipment makes it easier to process precision parts, with higher precision and better results. The testing equipment can detect the parts that have not met the requirements, so that all the products sent to the customers can truly meet the requirements.

   The requirements for the processing of precision parts are actually the size problem. It must be processed strictly according to the additional drawings. The actual size of the machine will not be the same as the theoretical size of the drawings, except that the processing size is within the error tolerance. It is a qualified component, so the requirements for the processing of precision parts are strictly in accordance with the theoretical size.

   If you want to know more about the production of precision parts, please contact us.Website:https://9skymachining.com