Installing tips an Acrylic Bathtub

Posted by Benjamin Dsoza on May 6th, 2019

What You'll Need

  • Acrylic bathtub
  • Siding
  • Sealant
  • Spirit level
  • Screws
  • Power drill
  • Wrench
  • Pliers
  • Tape measure

Installing an acrylic bathtub as a major aspect of a bathroom remodel can be an exorbitant interest; in any case, by remembering a couple of tips, you will find that it is an assignment that can be embraced generally effectively with beautiful outcomes.

1 - Measure Twice

Albeit most acrylic bathtubs arrive in a standard size, there is likewise an assortment of unordinary sizes accessible. To guarantee that you get the right bathtub for your bathroom, cautiously measure the break or other territories where it is to be set to guarantee that you have the right measurements.

2 - Consider the Floor

If you are Installing the best quality acrylic baths similarly situated from which you have removed another, the ground surface should initially be considered. Evacuating the old tub will empower you to analyze flooring which has recently been covered up away. Accept the open door to analyze it near guarantee that it has not endured any water harm. If that is the situation, it is not prone to be level, which will prevent the bathtub from sitting effectively.

Replace sections of flooring and joists with treated wood to forestall wet decay should be there be any gotten away water. Utilize a soul level to guarantee that the floor is level.

3 - Fit Supports

Keep in mind that the acrylic bathtub must be fitted in a way that will enable the water to keep running from it and stream down the drain. In light of that, guarantee that you accurately position the backings that accompany a tub that will be fitted. The backings that bear the weight at the tap end of the tub should be partially shorter than those at the flip side; guarantee that they are fixed in the right position.

4 - Sort Plumbing

If conceivable, fit the bathtub so that there are relatively few channels bunched together, which can make issues in case of there being any fix required. If other machines are required, for example, a shower siphon, guarantee that it is fitted and tried.

5 - Add Siding

Ensure that the estimations of the siding are with the end goal that empowers it to be fitted easily and safely at the free side of the acrylic bathtub. It must be fitted underneath the lip of the tub to keep any water from spilling underneath the tub and drenching the floor.

6 - Final Word

If the acrylic bathtub is being upheld by a divider, it is imperative to seal the joint between the bath and the divider. In the wake of burdening the tub by filling it with water, apply against parasitic sealant along each edge to avert any water entrance. This equivalent procedure must be utilized to seal the joins where the siding meets the divider. Leave the sealant to dry for 24 hours before utilizing the tub.

Like it? Share it!


Benjamin Dsoza

About the Author

Benjamin Dsoza
Joined: July 11th, 2018
Articles Posted: 15

More by this author